01d8d308fc
disable second ADC in IF mode, make input selectable in DS-mode
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-09-16 16:24:58 +02:00
519406264c
make rtlsdr_close() build on win32 again
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-09-13 23:27:35 +02:00
fc5881d4cd
add support for direct sampling mode
...
This commit adds the function rtlsdr_set_direct_sampling()
which can be used to enable/disable a mode where the
RTL2832 acts as a direct sampling receiver.
This mode disables the tuner, and by attaching a long
wire, or better, a 50Ω to 200Ω transformer and a lowpass-
filter to the In-phase ADC input (pin 1 or 2 of the RTL2832,
whereas pin 1 is at the molded dot) it is possible to listen to
shortwave radio stations. The coupling capacitors can be
left in place, but for better results they should be removed.
Tuning in this mode is done with the DDC, and since the
ADC samples with 28.8 MHz, tuning is possible from 0 to
28.8 MHz.
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-09-13 21:53:51 +02:00
1533422f98
rtl_fm: half the oversample bugs
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-09-10 18:51:07 +02:00
a8e7c7b21e
rtl_fm: Axiomatic's automatic termination
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-09-10 18:51:07 +02:00
f4a8a570c4
rtl_fm: fix auto/manual gain
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-09-10 18:51:07 +02:00
c792c4aeac
rtl_fm: bugs found by Axiomatic, alkw0ia and cgommer
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-09-10 18:51:07 +02:00
0c3c356d19
tuner_r820t: don't perform IMR calibration on init
...
This takes simply too much time (almost 3 seconds)
and doesn't really seem to make any difference for our
use case.
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-09-09 17:45:00 +02:00
9f3f44e03b
autotools: add missing header
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-09-08 21:42:58 +02:00
0c7ba8e03e
don't install udev rules by default, as it may pollute the system
...
For cmake call with -DINSTALL_UDEV_RULES=ON for the rules to be
installed during the default install/uninstall stages.
For autotools call "make install-udev-rules" or "make uninstall-udev-
The rules file will be installed to "/etc/udev/rules.d".
2012-09-08 16:37:56 +02:00
5a26bd51e7
add initial support for the R820T tuner
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-09-08 02:37:30 +02:00
0fb8543dde
install (and uninstall) udev rules file
2012-09-02 22:15:55 +02:00
5f88049c0c
rtlsdr_i2c_rad_reg: fix uninitialized variable
...
This could lead to a misdetection of the tuner on some
platforms (E4K instead of FC0013 on the raspberry pi).
Thanks to Christoph Gommel for reporting this issue.
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-08-10 02:11:40 +02:00
22b9d82fb5
implement a more robust cancelation mechanism of async reader
2012-08-08 21:21:46 +02:00
b49a8336ee
disable e4k enhanced mixer gain as it seems to have no effect
2012-08-05 16:35:47 +02:00
88cd4b33cf
return RTLSDR_TUNER_UNKNOWN (0) on failure of rtlsdr_get_tuner_type
2012-08-02 19:32:40 +02:00
4e2a0ea0c4
tuner_e4k: update license in header
...
Changing the license of the header as well,
which had been forgotten in commit
6aec27c6d0steve@steve-m.de >
2012-07-30 23:29:41 +02:00
54fe3eca01
don't print i2c read/write errors for now
...
During autodetection of the tuner they are
normal and may cause confusion.
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-21 20:50:51 +02:00
3dff6f3c26
add pid of MyGica TD312 stick
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-20 22:36:22 +02:00
2b8dfe43f8
fix win32 build
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-17 23:01:33 +02:00
ec925a64ad
rtl_fm: disable win build for now, install rtl_fm
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-17 21:38:52 +02:00
de978c3b3a
rtl_fm: fix typo that caused warning
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-17 21:20:41 +02:00
f7f02836c4
rtl_fm: use getopt on win32 as well
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-17 20:47:07 +02:00
374abaebb8
rtl_fm: add experimental options
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-17 20:42:03 +02:00
d2f8faa204
rtl_fm: disabling fast_atan2() for now, too noisy
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-17 20:42:03 +02:00
62cc815863
rtl_fm: crude integer atan2, around 40% faster
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-17 20:42:03 +02:00
6e80117205
rtl_fm: missed a var init
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-17 20:42:03 +02:00
d56267a42f
rtl_fm: tweaks for nicer scanning
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-17 20:42:03 +02:00
c3dde1db91
rtl_fm: multithreaded and frequency scanning
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-17 20:42:03 +02:00
defa7af74b
rtl_fm: broken multi freq scanning
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-17 20:42:03 +02:00
6a9f5c14c2
rtl_fm: add -E for optional lower edge tuning
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-17 20:42:03 +02:00
37f5559d1c
rtl_fm: satisfactory squelch
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-17 20:42:03 +02:00
fc390b3224
build rtl_fm
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-17 20:41:27 +02:00
6328e11da6
rtl_fm: prototype FM demod
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-17 20:40:15 +02:00
9d0232385b
add debug messages to rtlsdr_read/write_array
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-16 21:11:26 +02:00
42a6592e63
disable sample rate correction until we find a proper solution
2012-07-09 22:22:55 +02:00
2ad7b39e2d
rtlsdr_set_tuner_if_gain(): enable i2c repeater
...
Thanks to Stefan Sydow for noticing this bug.
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-08 23:28:31 +02:00
f9b5d7b0a6
apply frequency correction value on the xtal clock directly
...
by using this approach both, the tuning frequency and the sample rate
should be corrected at the same time.
2012-07-08 15:52:59 +02:00
7dc15d9fd7
add PIDs for 2 variants of the Terratex NOXON dongle
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-07 22:52:29 +02:00
f3cf83e3d7
disable DAGC by default, add control function
...
This adds rtlsdr_set_agc_mode() to enable/disable it.
Thanks to Leif Asbrink for finding this setting.
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-07 21:06:38 +02:00
98d1b864b6
have *_write_reg() functions pass through the return value
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-07-07 20:56:12 +02:00
6ea029d92c
add api function to control the IF gain for E4000 tuners
2012-07-05 00:28:52 +02:00
304c7c863d
rtl_test: tuner PLL benchmark only works with E4000
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-06-28 14:44:25 +02:00
fc736ae67f
init: disable 4 MHz clock output
...
The pin where this clock is outputted is quite close to the
ADC inputs, so better disable it.
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-06-22 15:52:35 +02:00
b09628b3e8
fix symbol visibility for automake builds
2012-06-13 01:29:37 +02:00
e5afd9894d
tuner_fc0012: add manual gain support
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-06-09 00:17:09 +02:00
6aec27c6d0
tuner_e4k: relicense driver under GPLv2+
...
All authors have agreed to relicense the driver under
GPLv2+, for easing integration in other projects
(such as V4L).
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-06-08 18:52:47 +02:00
0d70522eda
automake: define pkg-config variables
2012-06-07 22:41:42 +02:00
1686a0f905
add another PID for Noxon v1 stick
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-06-07 14:00:40 +02:00
3838df8669
rtl_tcp: ignore SIGPIPE
...
Signed-off-by: Steve Markgraf <steve@steve-m.de >
2012-06-05 18:04:10 +02:00
