Move sections "Set up Double Puppeting" under "Usage" as subsections

The changes in this commit reflect flow of configuring double puppeting. Since double puppeting can be set up after enabling bridges by chatting with the bridge's bot, the explanation about it may well be placed under "Usage" as subsection.

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

docs/configuring-playbook-bridge-appservice-kakaotalk.md

@@ -6,11 +6,6 @@ The playbook can install and configure [matrix-appservice-kakaotalk](https://src
 
 See the project's [documentation](https://src.miscworks.net/fair/matrix-appservice-kakaotalk) to learn what it does and why it might be useful to you.
 
-## Prerequisite (optional)
-
-If you want to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do) for this bridge automatically, you need to have enabled [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) for this playbook.
-
-For details about configuring Double Puppeting for this bridge, see the section below: [Set up Double Puppeting](#-set-up-double-puppeting)
 
 ## Adjusting the playbook configuration
 
@@ -45,7 +40,7 @@ Start a chat with `@kakaotalkbot:example.com` (where `example.com` is your base
 
 Send `login --save EMAIL_OR_PHONE_NUMBER` to the bridge bot to enable bridging for your Kakaotalk account. The `--save` flag may be omitted, if you'd rather not save your password.
 
-### 💡 Set up Double Puppeting
+### Set up Double Puppeting
 
 After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
 
@@ -53,12 +48,14 @@ To set it up, you have 2 ways of going about it.
 
 #### Method 1: automatically, by enabling Shared Secret Auth
 
-The bridge automatically performs Double Puppeting if [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service is configured and enabled on the server for this playbook.
+The bridge will automatically perform Double Puppeting if you enable [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) for this playbook.
 
 This is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
 
 #### Method 2: manually, by asking each user to provide a working access token
 
+**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
+
 When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
 
 - retrieve a Matrix access token for yourself. Refer to the documentation on [how to do that](obtaining-access-tokens.md).

docs/configuring-playbook-bridge-beeper-linkedin.md

@@ -39,7 +39,7 @@ After configuring the playbook, run the [installation](installing.md) command: `
 
 ## Set up Double Puppeting by enabling Appservice Double Puppet or Shared Secret Auth
 
-The bridge automatically performs Double Puppeting if [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) or [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service is configured and enabled on the server for this playbook.
+The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service or the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
 
 Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
 

docs/configuring-playbook-bridge-mautrix-discord.md

@@ -15,12 +15,6 @@ There are 2 ways to login to discord using this bridge, either by [scanning a QR
 
 If this is a dealbreaker for you, consider using one of the other Discord bridges supported by the playbook: [mx-puppet-discord](configuring-playbook-bridge-mx-puppet-discord.md) or [matrix-appservice-discord](configuring-playbook-bridge-appservice-discord.md). These come with their own complexity and limitations, however, so we recommend that you proceed with this one if possible.
 
-### Enable Appservice Double Puppet or Shared Secret Auth (optional)
-
-If you want to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do) for this bridge automatically, you need to have enabled [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) or [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
-
-For details about configuring Double Puppeting for this bridge, see the section below: [Set up Double Puppeting](#-set-up-double-puppeting)
-
 ## Adjusting the playbook configuration
 
 To enable the bridge, add the following configuration to your `inventory/host_vars/matrix.example.com/vars.yml` file:
@@ -75,7 +69,7 @@ To acquire the token, open Discord in a private browser window. Then open the de
     - for each guild that you'd like bridged, send `guilds bridge GUILD_ID --entire`
 8. You may wish to uninstall the Discord app from your phone now. It's not needed for the bridge to function.
 
-### 💡 Set up Double Puppeting
+### Set up Double Puppeting
 
 After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
 
@@ -83,7 +77,7 @@ To set it up, you have 2 ways of going about it.
 
 #### Method 1: automatically, by enabling Appservice Double Puppet or Shared Secret Auth
 
-The bridge automatically performs Double Puppeting if [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) or [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service is configured and enabled on the server for this playbook.
+The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service or the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
 
 Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
 
@@ -91,6 +85,8 @@ Enabling double puppeting by enabling the [Shared Secret Auth](configuring-playb
 
 #### Method 2: manually, by asking each user to provide a working access token
 
+**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
+
 When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
 
 - retrieve a Matrix access token for yourself. Refer to the documentation on [how to do that](obtaining-access-tokens.md).

docs/configuring-playbook-bridge-mautrix-facebook.md

@@ -6,12 +6,6 @@ The playbook can install and configure [mautrix-facebook](https://github.com/mau
 
 See the project's [documentation](https://github.com/mautrix/facebook/blob/master/ROADMAP.md) to learn what it does and why it might be useful to you.
 
-## Prerequisite (optional)
-
-If you want to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do) for this bridge automatically, you need to have enabled [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) for this playbook.
-
-For details about configuring Double Puppeting for this bridge, see the section below: [Set up Double Puppeting](#-set-up-double-puppeting)
-
 ## Adjusting the playbook configuration
 
 To enable the bridge, add the following configuration to your `inventory/host_vars/matrix.example.com/vars.yml` file:
@@ -65,7 +59,7 @@ Send `login YOUR_FACEBOOK_EMAIL_ADDRESS` to the bridge bot to enable bridging fo
 
 If you run into trouble, check the [Troubleshooting](#troubleshooting) section below.
 
-### 💡 Set up Double Puppeting
+### Set up Double Puppeting
 
 After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
 
@@ -73,12 +67,14 @@ To set it up, you have 2 ways of going about it.
 
 #### Method 1: automatically, by enabling Shared Secret Auth
 
-The bridge automatically performs Double Puppeting if [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service is configured and enabled on the server for this playbook.
+The bridge will automatically perform Double Puppeting if you enable [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) for this playbook.
 
 This is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
 
 #### Method 2: manually, by asking each user to provide a working access token
 
+**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
+
 When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
 
 - retrieve a Matrix access token for yourself. Refer to the documentation on [how to do that](obtaining-access-tokens.md).

docs/configuring-playbook-bridge-mautrix-gmessages.md

@@ -4,12 +4,6 @@ The playbook can install and configure [mautrix-gmessages](https://github.com/ma
 
 See the project's [documentation](https://docs.mau.fi/bridges/go/gmessages/index.html) to learn what it does and why it might be useful to you.
 
-## Prerequisite (optional)
-
-If you want to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do) for this bridge automatically, you need to have enabled [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) for this playbook.
-
-For details about configuring Double Puppeting for this bridge, see the section below: [Set up Double Puppeting](#-set-up-double-puppeting)
-
 ## Adjusting the playbook configuration
 
 To enable the bridge, add the following configuration to your `inventory/host_vars/matrix.example.com/vars.yml` file:
@@ -22,23 +16,19 @@ matrix_mautrix_gmessages_enabled: true
 
 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
-## Usage
+## Set up Double Puppeting
 
-You then need to start a chat with `@gmessagesbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).
+If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
 
-### 💡 Set up Double Puppeting
+### Method 1: automatically, by enabling Appservice Double Puppet
 
-After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
+The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service for this playbook.
 
-To set it up, you have 2 ways of going about it.
+Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
 
-#### Method 1: automatically, by enabling Appservice Double Puppet
+### Method 2: manually, by asking each user to provide a working access token
 
-The bridge automatically performs Double Puppeting if [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service is configured and enabled on the server for this playbook.
+**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
-
-This is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
-
-#### Method 2: manually, by asking each user to provide a working access token
 
 When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
 
@@ -47,3 +37,8 @@ When using this method, **each user** that wishes to enable Double Puppeting nee
 - send the access token to the bot. Example: `login-matrix MATRIX_ACCESS_TOKEN_HERE`
 
 - make sure you don't log out the `Mautrix-gmessages` device some time in the future, as that would break the Double Puppeting feature
+
+
+## Usage
+
+You then need to start a chat with `@gmessagesbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).

docs/configuring-playbook-bridge-mautrix-googlechat.md

@@ -4,12 +4,6 @@ The playbook can install and configure [mautrix-googlechat](https://github.com/m
 
 See the project's [documentation](https://docs.mau.fi/bridges/python/googlechat/index.html) to learn what it does and why it might be useful to you.
 
-## Prerequisite (optional)
-
-If you want to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do) for this bridge automatically, you need to have enabled [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) or [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
-
-For details about configuring Double Puppeting for this bridge, see the section below: [Set up Double Puppeting](#-set-up-double-puppeting)
-
 ## Adjusting the playbook configuration
 
 To enable the [Google Chat](https://chat.google.com/) bridge, add the following configuration to your `inventory/host_vars/matrix.example.com/vars.yml` file:
@@ -34,7 +28,7 @@ Once logged in, recent chats should show up as new conversations automatically.
 
 You can learn more about authentication from the bridge's [official documentation on Authentication](https://docs.mau.fi/bridges/python/googlechat/authentication.html).
 
-### 💡 Set up Double Puppeting
+### Set up Double Puppeting
 
 After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
 
@@ -42,7 +36,7 @@ To set it up, you have 2 ways of going about it.
 
 #### Method 1: automatically, by enabling Appservice Double Puppet or Shared Secret Auth
 
-The bridge automatically performs Double Puppeting if [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) or [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service is configured and enabled on the server for this playbook.
+The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service or the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
 
 Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
 
@@ -51,6 +45,8 @@ Enabling double puppeting by enabling the [Shared Secret Auth](configuring-playb
 
 #### Method 2: manually, by asking each user to provide a working access token
 
+**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
+
 When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
 
 - retrieve a Matrix access token for yourself. Refer to the documentation on [how to do that](obtaining-access-tokens.md).

docs/configuring-playbook-bridge-mautrix-hangouts.md

@@ -6,12 +6,6 @@ The playbook can install and configure [mautrix-hangouts](https://github.com/mau
 
 See the project's [documentation](https://docs.mau.fi/bridges/python/hangouts/index.html) to learn what it does and why it might be useful to you.
 
-## Prerequisite (optional)
-
-If you want to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do) for this bridge automatically, you need to have enabled [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) for this playbook.
-
-For details about configuring Double Puppeting for this bridge, see the section below: [Set up Double Puppeting](#-set-up-double-puppeting)
-
 ## Adjusting the playbook configuration
 
 To enable the [Google Hangouts](https://hangouts.google.com/) bridge, add the following configuration to your `inventory/host_vars/matrix.example.com/vars.yml` file:
@@ -36,7 +30,7 @@ Once logged in, recent chats should show up as new conversations automatically.
 
 You can learn more about authentication from the bridge's [official documentation on Authentication](https://docs.mau.fi/bridges/python/hangouts/authentication.html).
 
-### 💡 Set up Double Puppeting
+### Set up Double Puppeting
 
 After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
 
@@ -44,12 +38,15 @@ To set it up, you have 2 ways of going about it.
 
 #### Method 1: automatically, by enabling Shared Secret Auth
 
-The bridge automatically performs Double Puppeting if [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service is configured and enabled on the server for this playbook.
+The bridge will automatically perform Double Puppeting if you enable [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) for this playbook.
 
 This is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
 
+
 #### Method 2: manually, by asking each user to provide a working access token
 
+**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
+
 When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
 
 - retrieve a Matrix access token for yourself. Refer to the documentation on [how to do that](obtaining-access-tokens.md).

docs/configuring-playbook-bridge-mautrix-meta-instagram.md

@@ -6,9 +6,8 @@ Since this bridge component can bridge to both [Messenger](https://messenger.com
 
 This documentation page only deals with the bridge's ability to bridge to Instagram. For bridging to Facebook/Messenger, see [Setting up Messenger bridging via Mautrix Meta](configuring-playbook-bridge-mautrix-meta-messenger.md).
 
-## Prerequisites
 
-### Migrating from the old mautrix-instagram bridge
+## Migrating from the old mautrix-instagram bridge
 
 If you've been using the [mautrix-instagram](./configuring-playbook-bridge-mautrix-instagram.md) bridge, **you'd better get rid of it first** or the 2 bridges will be in conflict:
 
@@ -19,11 +18,6 @@ To do so, send a `clean-rooms` command to the management room with the old bridg
 
 Then, consider disabling the old bridge in your configuration, so it won't recreate the portals when you receive new messages.
 
-### Enable Appservice Double Puppet (optional)
-
-If you want to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do) for this bridge automatically, you need to have enabled [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service for this playbook.
-
-For details about configuring Double Puppeting for this bridge, see the section below: [Set up Double Puppeting](#-set-up-double-puppeting)
 
 ## Adjusting the playbook configuration
 
@@ -70,23 +64,19 @@ You may wish to look at `roles/custom/matrix-bridge-mautrix-meta-instagram/templ
 
 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
-## Usage
+## Set up Double Puppeting
 
-You then need to start a chat with `@instagrambot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).
+If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
 
-### 💡 Set up Double Puppeting
+### Method 1: automatically, by enabling Appservice Double Puppet
 
-After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
+The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service for this playbook.
 
-To set it up, you have 2 ways of going about it.
+Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
 
-#### Method 1: automatically, by enabling Appservice Double Puppet
+### Method 2: manually, by asking each user to provide a working access token
 
-The bridge automatically performs Double Puppeting if [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service is configured and enabled on the server for this playbook.
+**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
-
-This is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
-
-#### Method 2: manually, by asking each user to provide a working access token
 
 When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
 
@@ -95,3 +85,8 @@ When using this method, **each user** that wishes to enable Double Puppeting nee
 - send the access token to the bot. Example: `login-matrix MATRIX_ACCESS_TOKEN_HERE`
 
 - make sure you don't log out the session for which you obtained an access token some time in the future, as that would break the Double Puppeting feature
+
+
+## Usage
+
+You then need to start a chat with `@instagrambot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).

docs/configuring-playbook-bridge-mautrix-meta-messenger.md

@@ -6,9 +6,8 @@ Since this bridge component can bridge to both [Messenger](https://messenger.com
 
 This documentation page only deals with the bridge's ability to bridge to Facebook Messenger. For bridging to Instagram, see [Setting up Instagram bridging via Mautrix Meta](configuring-playbook-bridge-mautrix-meta-instagram.md).
 
-## Prerequisites
 
-### Migrating from the old mautrix-facebook bridge
+## Migrating from the old mautrix-facebook bridge
 
 If you've been using the [mautrix-facebook](./configuring-playbook-bridge-mautrix-facebook.md) bridge, it's possible to migrate the database using [instructions from the bridge documentation](https://docs.mau.fi/bridges/go/meta/facebook-migration.html) (advanced).
 
@@ -18,12 +17,6 @@ Then, consider disabling the old bridge in your configuration, so it won't recre
 
 **Note**: the user ID of the new bridge bot is `@messengerbot:example.com`, not `@facebookbot:example.com`. After disabling the old bridge, its bot user will stop responding to a command.
 
-### Enable Appservice Double Puppet (optional)
-
-If you want to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do) for this bridge automatically, you need to have enabled [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service for this playbook.
-
-For details about configuring Double Puppeting for this bridge, see the section below: [Set up Double Puppeting](#-set-up-double-puppeting)
-
 ## Adjusting the playbook configuration
 
 To enable the bridge, add the following configuration to your `inventory/host_vars/matrix.example.com/vars.yml` file:
@@ -84,27 +77,19 @@ You may wish to look at `roles/custom/matrix-bridge-mautrix-meta-messenger/templ
 
 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
-## Usage
+## Set up Double Puppeting
 
-You then need to start a chat with `@messengerbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain). Note that the user ID of the bridge's bot is not `@facebookbot:example.com`.
+If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
 
-You then need to send a `login` command and follow the bridge bot's instructions.
+### Method 1: automatically, by enabling Appservice Double Puppet
 
-Given that the bot is configured in `messenger` [bridge mode](#bridge-mode) by default, you will need to log in to [messenger.com](https://messenger.com/) (not `facebook.com`!) and obtain the cookies from there as per [the bridge's authentication instructions](https://docs.mau.fi/bridges/go/meta/authentication.html).
+The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service for this playbook.
 
-### 💡 Set up Double Puppeting
+Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
 
-After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
+### Method 2: manually, by asking each user to provide a working access token
 
-To set it up, you have 2 ways of going about it.
+**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
-
-#### Method 1: automatically, by enabling Appservice Double Puppet
-
-The bridge automatically performs Double Puppeting if [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service is configured and enabled on the server for this playbook.
-
-This is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
-
-#### Method 2: manually, by asking each user to provide a working access token
 
 When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
 
@@ -113,3 +98,12 @@ When using this method, **each user** that wishes to enable Double Puppeting nee
 - send the access token to the bot. Example: `login-matrix MATRIX_ACCESS_TOKEN_HERE`
 
 - make sure you don't log out the session for which you obtained an access token some time in the future, as that would break the Double Puppeting feature
+
+
+## Usage
+
+You then need to start a chat with `@messengerbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain). Note that the user ID of the bridge's bot is not `@facebookbot:example.com`.
+
+You then need to send a `login` command and follow the bridge bot's instructions.
+
+Given that the bot is configured in `messenger` [bridge mode](#bridge-mode) by default, you will need to log in to [messenger.com](https://messenger.com/) (not `facebook.com`!) and obtain the cookies from there as per [the bridge's authentication instructions](https://docs.mau.fi/bridges/go/meta/authentication.html).

docs/configuring-playbook-bridge-mautrix-signal.md

@@ -4,22 +4,10 @@ The playbook can install and configure [mautrix-signal](https://github.com/mautr
 
 See the project's [documentation](https://docs.mau.fi/bridges/python/signal/index.html) to learn what it does and why it might be useful to you.
 
+**Note/Prerequisite**: If you're running with the Postgres database server integrated by the playbook (which is the default), you don't need to do anything special and can easily proceed with installing. However, if you're [using an external Postgres server](configuring-playbook-external-postgres.md), you'd need to manually prepare a Postgres database for this bridge and adjust the variables related to that (`matrix_mautrix_signal_database_*`).
+
 **Note**: This revamped version of the [mautrix-signal (legacy)](configuring-playbook-bridge-mautrix-signal.md) may increase the CPU usage of your homeserver.
 
-## Prerequisites (optional)
-
-### Prepare Postgres database on external Postgres server
-
-If you're running with the Postgres database server integrated by the playbook (which is the default), you don't need to do anything special and can easily proceed with installing.
-
-However, if you're [using an external Postgres server](configuring-playbook-external-postgres.md), you'd need to manually prepare a Postgres database for this bridge and adjust the variables related to that (`matrix_mautrix_signal_database_*`).
-
-### Enable Appservice Double Puppet
-
-If you want to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do) for this bridge automatically, you need to have enabled [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service for this playbook.
-
-For details about configuring Double Puppeting for this bridge, see the section below: [Set up Double Puppeting](#-set-up-double-puppeting)
-
 ## Adjusting the playbook configuration
 
 To enable the bridge, add the following configuration to your `inventory/host_vars/matrix.example.com/vars.yml` file:
@@ -70,23 +58,19 @@ You may wish to look at `roles/custom/matrix-bridge-mautrix-signal/templates/con
 
 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
-## Usage
+## Set up Double Puppeting
 
-You then need to start a chat with `@signalbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).
+If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
 
-### 💡 Set up Double Puppeting
+### Method 1: automatically, by enabling Appservice Double Puppet
 
-After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
+The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service for this playbook.
-
-To set it up, you have 2 ways of going about it.
-
-#### Method 1: automatically, by enabling Appservice Double Puppet
-
-The bridge automatically performs Double Puppeting if [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service is configured and enabled on the server for this playbook.
 
 This is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
 
-#### Method 2: manually, by asking each user to provide a working access token
+### Method 2: manually, by asking each user to provide a working access token
+
+**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
 
 When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
 
@@ -95,3 +79,8 @@ When using this method, **each user** that wishes to enable Double Puppeting nee
 - send the access token to the bot. Example: `login-matrix MATRIX_ACCESS_TOKEN_HERE`
 
 - make sure you don't log out the `Mautrix-Signal` device some time in the future, as that would break the Double Puppeting feature
+
+
+## Usage
+
+You then need to start a chat with `@signalbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).

docs/configuring-playbook-bridge-mautrix-slack.md

@@ -17,11 +17,6 @@ For using this bridge, you would need to authenticate by **providing your userna
 
 Note that neither of these methods are officially supported by Slack. [matrix-appservice-slack](configuring-playbook-bridge-appservice-slack.md) uses a Slack bot account which is the only officially supported method for bridging a Slack channel.
 
-### Enable Appservice Double Puppet (optional)
-
-If you want to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do) for this bridge automatically, you need to have enabled [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service for this playbook.
-
-For details about configuring Double Puppeting for this bridge, see the section below: [Set up Double Puppeting](#-set-up-double-puppeting)
 
 ## Adjusting the playbook configuration
 
@@ -58,7 +53,7 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 4. Now that you're logged in, you can send a `help` command to the bot again, to see additional commands you have access to.
 5. Slack channels should automatically begin bridging if you authenticated using a token. Otherwise, you must wait to receive a message in the channel if you used password authentication.
 
-### 💡 Set up Double Puppeting
+### Set up Double Puppeting
 
 After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
 
@@ -66,12 +61,14 @@ To set it up, you have 2 ways of going about it.
 
 #### Method 1: automatically, by enabling Appservice Double Puppet
 
-The bridge automatically performs Double Puppeting if [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service is configured and enabled on the server for this playbook.
+The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service for this playbook.
 
 This is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
 
 #### Method 2: manually, by asking each user to provide a working access token
 
+**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
+
 When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
 
 - retrieve a Matrix access token for yourself. Refer to the documentation on [how to do that](obtaining-access-tokens.md).

docs/configuring-playbook-bridge-mautrix-telegram.md

@@ -4,12 +4,6 @@ The playbook can install and configure [mautrix-telegram](https://github.com/mau
 
 See the project's [documentation](https://docs.mau.fi/bridges/python/telegram/index.html) to learn what it does and why it might be useful to you.
 
-## Prerequisite (optional)
-
-If you want to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do) for this bridge automatically, you need to have enabled [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) or [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
-
-For details about configuring Double Puppeting for this bridge, see the section below: [Set up Double Puppeting](#-set-up-double-puppeting)
-
 ## Adjusting the playbook configuration
 
 You'll need to obtain API keys from [https://my.telegram.org/apps](https://my.telegram.org/apps) and then add the following configuration to your `inventory/host_vars/matrix.example.com/vars.yml` file:
@@ -24,6 +18,31 @@ matrix_mautrix_telegram_api_hash: YOUR_TELEGRAM_API_HASH
 
 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
+## Set up Double Puppeting
+
+If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
+
+### Method 1: automatically, by enabling Appservice Double Puppet or Shared Secret Auth
+
+The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service or the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
+
+Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
+
+Enabling double puppeting by enabling the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service works at the time of writing, but is deprecated and will stop working in the future.
+
+### Method 2: manually, by asking each user to provide a working access token
+
+**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging.
+
+When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
+
+- retrieve a Matrix access token for yourself. Refer to the documentation on [how to do that](obtaining-access-tokens.md).
+
+- send `login-matrix` to the bot and follow instructions about how to send the access token to it
+
+- make sure you don't log out the `Mautrix-Telegram` device some time in the future, as that would break the Double Puppeting feature
+
+
 ## Usage
 
 You then need to start a chat with `@telegrambot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).
@@ -52,29 +71,3 @@ If you like to exclude all groups from syncing and use the Telgeram-Bridge only
 ```yaml
 matrix_mautrix_telegram_filter_mode: whitelist
 ```
-
-### 💡 Set up Double Puppeting
-
-After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
-
-To set it up, you have 2 ways of going about it.
-
-#### Method 1: automatically, by enabling Appservice Double Puppet or Shared Secret Auth
-
-The bridge automatically performs Double Puppeting if [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) or [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service is configured and enabled on the server for this playbook.
-
-Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
-
-Enabling double puppeting by enabling the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service works at the time of writing, but is deprecated and will stop working in the future.
-
-#### Method 2: manually, by asking each user to provide a working access token
-
-**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging.
-
-When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
-
-- retrieve a Matrix access token for yourself. Refer to the documentation on [how to do that](obtaining-access-tokens.md).
-
-- send `login-matrix` to the bot and follow instructions about how to send the access token to it
-
-- make sure you don't log out the `Mautrix-Telegram` device some time in the future, as that would break the Double Puppeting feature

docs/configuring-playbook-bridge-mautrix-twitter.md

@@ -6,12 +6,6 @@ The playbook can install and configure [mautrix-twitter](https://github.com/maut
 
 See the project's [documentation](https://github.com/mautrix/twitter) to learn what it does and why it might be useful to you.
 
-## Prerequisite (optional)
-
-If you want to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do) for this bridge automatically, you need to have enabled [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) or [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
-
-For details about configuring Double Puppeting for this bridge, see the section below: [Set up Double Puppeting](#-set-up-double-puppeting)
-
 ## Adjusting the playbook configuration
 
 To enable the bridge, add the following configuration to your `inventory/host_vars/matrix.example.com/vars.yml` file:
@@ -31,7 +25,7 @@ After configuring the playbook, run the [installation](installing.md) command: `
 
 You can learn more here about authentication from the bridge's [official documentation on Authentication](https://docs.mau.fi/bridges/python/twitter/authentication.html).
 
-### 💡 Set up Double Puppeting
+### Set up Double Puppeting
 
 After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
 
@@ -39,7 +33,7 @@ To set it up, you have 2 ways of going about it.
 
 #### Method 1: automatically, by enabling Appservice Double Puppet or Shared Secret Auth
 
-The bridge automatically performs Double Puppeting if [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) or [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service is configured and enabled on the server for this playbook.
+The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service or the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
 
 Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
 

docs/configuring-playbook-bridge-mautrix-whatsapp.md

@@ -4,12 +4,6 @@ The playbook can install and configure [mautrix-whatsapp](https://github.com/mau
 
 See the project's [documentation](https://docs.mau.fi/bridges/go/whatsapp/index.html) to learn what it does and why it might be useful to you.
 
-## Prerequisite (optional)
-
-If you want to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do) for this bridge automatically, you need to have enabled [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) or [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
-
-For details about configuring Double Puppeting for this bridge, see the section below: [Set up Double Puppeting](#-set-up-double-puppeting)
-
 ## Adjusting the playbook configuration
 
 To enable the bridge, add the following configuration to your `inventory/host_vars/matrix.example.com/vars.yml` file:
@@ -38,25 +32,21 @@ If you want to activate the relay bot in a room, send `!wa set-relay`. To deacti
 
 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
-## Usage
+## Set up Double Puppeting
 
-You then need to start a chat with `@whatsappbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).
+If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
 
-### 💡 Set up Double Puppeting
+### Method 1: automatically, by enabling Appservice Double Puppet or Shared Secret Auth
 
-After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
+The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service or the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
-
-To set it up, you have 2 ways of going about it.
-
-#### Method 1: automatically, by enabling Appservice Double Puppet or Shared Secret Auth
-
-The bridge automatically performs Double Puppeting if [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) or [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service is configured and enabled on the server for this playbook.
 
 Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
 
 Enabling double puppeting by enabling the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service works at the time of writing, but is deprecated and will stop working in the future.
 
-#### Method 2: manually, by asking each user to provide a working access token
+### Method 2: manually, by asking each user to provide a working access token
+
+**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
 
 When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
 
@@ -65,3 +55,8 @@ When using this method, **each user** that wishes to enable Double Puppeting nee
 - send the access token to the bot. Example: `login-matrix MATRIX_ACCESS_TOKEN_HERE`
 
 - make sure you don't log out the `Mautrix-Whatsapp` device some time in the future, as that would break the Double Puppeting feature
+
+
+## Usage
+
+You then need to start a chat with `@whatsappbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).

docs/configuring-playbook-mautrix-bridges.md

@@ -99,7 +99,7 @@ After configuring the playbook, run the [installation](installing.md) command: `
 
 To set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service for this playbook.
 
-The bridge automatically performs Double Puppeting if [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) is configured and enabled on the server for this playbook by adding
+The bridge will automatically perform Double Puppeting if you enable [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) for this playbook by adding
 
 ```yaml
 matrix_appservice_double_puppet_enabled: true