Move sections "Set up Double Puppeting" under "Usage" as subsections

The changes in this commit reflect flow of configuring double puppeting. Since double puppeting can be set up after enabling bridges by chatting with the bridge's bot, the explanation about it may well be placed under "Usage" as subsection.

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

docs/configuring-playbook-bridge-appservice-kakaotalk.md

@@ -17,17 +17,6 @@ matrix_appservice_kakaotalk_enabled: true
 
 You may optionally wish to add some [Additional configuration](#additional-configuration), or to [prepare for double-puppeting](#set-up-double-puppeting) before the initial installation.
 
-## Installing
-
-After configuring the playbook, run the [installation](installing.md) command:
-
-```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
-```
-
-To make use of the Kakaotalk bridge, see [Usage](#usage) below.
-
-
 ### Additional configuration
 
 There are some additional things you may wish to configure about the bridge.
@@ -37,10 +26,25 @@ Take a look at:
 - `roles/custom/matrix-bridge-appservice-kakaotalk/defaults/main.yml` for some variables that you can customize via your `vars.yml` file
 - `roles/custom/matrix-bridge-appservice-kakaotalk/templates/config.yaml.j2` for the bridge's default configuration. You can override settings (even those that don't have dedicated playbook variables) using the `matrix_appservice_kakaotalk_configuration_extension_yaml` variable
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command:
+
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+## Usage
+
+Start a chat with `@kakaotalkbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).
+
+Send `login --save EMAIL_OR_PHONE_NUMBER` to the bridge bot to enable bridging for your Kakaotalk account. The `--save` flag may be omitted, if you'd rather not save your password.
 
 ### Set up Double Puppeting
 
-If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
+After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
+
+To set it up, you have 2 ways of going about it.
 
 #### Method 1: automatically, by enabling Shared Secret Auth
 
@@ -59,12 +63,3 @@ When using this method, **each user** that wishes to enable Double Puppeting nee
 - send the access token to the bot. Example: `login-matrix MATRIX_ACCESS_TOKEN_HERE`
 
 - make sure you don't log out the `Appservice-Kakaotalk` device some time in the future, as that would break the Double Puppeting feature
-
-
-## Usage
-
-Start a chat with `@kakaotalkbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).
-
-Send `login --save EMAIL_OR_PHONE_NUMBER` to the bridge bot to enable bridging for your Kakaotalk account. The `--save` flag may be omitted, if you'd rather not save your password.
-
-After successfully enabling bridging, you may wish to [set up Double Puppeting](#set-up-double-puppeting), if you haven't already done so.

docs/configuring-playbook-bridge-mautrix-discord.md

@@ -25,17 +25,6 @@ matrix_mautrix_discord_enabled: true
 
 You may optionally wish to add some [Additional configuration](#additional-configuration), or to [prepare for double-puppeting](#set-up-double-puppeting) before the initial installation.
 
-## Installing
-
-After configuring the playbook, run the [installation](installing.md) command:
-
-```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
-```
-
-To make use of the bridge, see [Usage](#usage) below.
-
-
 ### Additional configuration
 
 There are some additional things you may wish to configure about the bridge.
@@ -45,31 +34,13 @@ Take a look at:
 - `roles/custom/matrix-bridge-mautrix-discord/defaults/main.yml` for some variables that you can customize via your `vars.yml` file
 - `roles/custom/matrix-bridge-mautrix-discord/templates/config.yaml.j2` for the bridge's default configuration. You can override settings (even those that don't have dedicated playbook variables) using the `matrix_mautrix_discord_configuration_extension_yaml` variable
 
+## Installing
 
-### Set up Double Puppeting
-
-If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
-
-#### Method 1: automatically, by enabling Appservice Double Puppet or Shared Secret Auth
-
-The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service or the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
-
-Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
-
-Enabling double puppeting by enabling the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service works at the time of writing, but is deprecated and will stop working in the future.
-
-#### Method 2: manually, by asking each user to provide a working access token
-
-**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
-
-When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
-
-- retrieve a Matrix access token for yourself. Refer to the documentation on [how to do that](obtaining-access-tokens.md).
-
-- send the access token to the bot. Example: `login-matrix MATRIX_ACCESS_TOKEN_HERE`
-
-- make sure you don't log out the `Mautrix-Discord` device some time in the future, as that would break the Double Puppeting feature
+After configuring the playbook, run the [installation](installing.md) command:
 
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
 
 ## Usage
 
@@ -97,3 +68,29 @@ To acquire the token, open Discord in a private browser window. Then open the de
     - send `guilds status` to see the list of guilds
     - for each guild that you'd like bridged, send `guilds bridge GUILD_ID --entire`
 8. You may wish to uninstall the Discord app from your phone now. It's not needed for the bridge to function.
+
+### Set up Double Puppeting
+
+After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
+
+To set it up, you have 2 ways of going about it.
+
+#### Method 1: automatically, by enabling Appservice Double Puppet or Shared Secret Auth
+
+The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service or the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
+
+Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
+
+Enabling double puppeting by enabling the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service works at the time of writing, but is deprecated and will stop working in the future.
+
+#### Method 2: manually, by asking each user to provide a working access token
+
+**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
+
+When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
+
+- retrieve a Matrix access token for yourself. Refer to the documentation on [how to do that](obtaining-access-tokens.md).
+
+- send the access token to the bot. Example: `login-matrix MATRIX_ACCESS_TOKEN_HERE`
+
+- make sure you don't log out the `Mautrix-Discord` device some time in the future, as that would break the Double Puppeting feature

docs/configuring-playbook-bridge-mautrix-facebook.md

@@ -51,17 +51,27 @@ You may wish to look at `roles/custom/matrix-bridge-mautrix-facebook/templates/c
 
 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
-## Set up Double Puppeting
+## Usage
 
-If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
+You then need to start a chat with `@facebookbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).
 
-### Method 1: automatically, by enabling Shared Secret Auth
+Send `login YOUR_FACEBOOK_EMAIL_ADDRESS` to the bridge bot to enable bridging for your Facebook Messenger account. You can learn more here about authentication from the bridge's [official documentation on Authentication](https://docs.mau.fi/bridges/python/facebook/authentication.html).
+
+If you run into trouble, check the [Troubleshooting](#troubleshooting) section below.
+
+### Set up Double Puppeting
+
+After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
+
+To set it up, you have 2 ways of going about it.
+
+#### Method 1: automatically, by enabling Shared Secret Auth
 
 The bridge will automatically perform Double Puppeting if you enable [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) for this playbook.
 
 This is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
 
-### Method 2: manually, by asking each user to provide a working access token
+#### Method 2: manually, by asking each user to provide a working access token
 
 **Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
 
@@ -73,18 +83,6 @@ When using this method, **each user** that wishes to enable Double Puppeting nee
 
 - make sure you don't log out the `Mautrix-Facebook` device some time in the future, as that would break the Double Puppeting feature
 
-
-## Usage
-
-You then need to start a chat with `@facebookbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).
-
-Send `login YOUR_FACEBOOK_EMAIL_ADDRESS` to the bridge bot to enable bridging for your Facebook Messenger account. You can learn more here about authentication from the bridge's [official documentation on Authentication](https://docs.mau.fi/bridges/python/facebook/authentication.html).
-
-If you run into trouble, check the [Troubleshooting](#troubleshooting) section below.
-
-After successfully enabling bridging, you may wish to [set up Double Puppeting](#set-up-double-puppeting), if you haven't already done so.
-
-
 ## Troubleshooting
 
 ### Facebook rejecting login attempts and forcing you to change password

docs/configuring-playbook-bridge-mautrix-googlechat.md

@@ -16,32 +16,6 @@ matrix_mautrix_googlechat_enabled: true
 
 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
-## Set up Double Puppeting
-
-If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
-
-### Method 1: automatically, by enabling Appservice Double Puppet or Shared Secret Auth
-
-The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service or the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
-
-Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
-
-Enabling double puppeting by enabling the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service works at the time of writing, but is deprecated and will stop working in the future.
-
-
-### Method 2: manually, by asking each user to provide a working access token
-
-**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
-
-When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
-
-- retrieve a Matrix access token for yourself. Refer to the documentation on [how to do that](obtaining-access-tokens.md).
-
-- send the access token to the bot. Example: `login-matrix MATRIX_ACCESS_TOKEN_HERE`
-
-- make sure you don't log out the `Mautrix-googlechat` device some time in the future, as that would break the Double Puppeting feature
-
-
 ## Usage
 
 Once the bot is enabled you need to start a chat with `googlechat bridge bot` with handle `@googlechatbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).
@@ -54,4 +28,29 @@ Once logged in, recent chats should show up as new conversations automatically.
 
 You can learn more about authentication from the bridge's [official documentation on Authentication](https://docs.mau.fi/bridges/python/googlechat/authentication.html).
 
-After successfully enabling bridging, you may wish to [set up Double Puppeting](#set-up-double-puppeting), if you haven't already done so.
+### Set up Double Puppeting
+
+After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
+
+To set it up, you have 2 ways of going about it.
+
+#### Method 1: automatically, by enabling Appservice Double Puppet or Shared Secret Auth
+
+The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service or the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
+
+Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
+
+Enabling double puppeting by enabling the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service works at the time of writing, but is deprecated and will stop working in the future.
+
+
+#### Method 2: manually, by asking each user to provide a working access token
+
+**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
+
+When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
+
+- retrieve a Matrix access token for yourself. Refer to the documentation on [how to do that](obtaining-access-tokens.md).
+
+- send the access token to the bot. Example: `login-matrix MATRIX_ACCESS_TOKEN_HERE`
+
+- make sure you don't log out the `Mautrix-googlechat` device some time in the future, as that would break the Double Puppeting feature

docs/configuring-playbook-bridge-mautrix-hangouts.md

@@ -18,30 +18,6 @@ matrix_mautrix_hangouts_enabled: true
 
 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
-## Set up Double Puppeting
-
-If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
-
-### Method 1: automatically, by enabling Shared Secret Auth
-
-The bridge will automatically perform Double Puppeting if you enable [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) for this playbook.
-
-This is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
-
-
-### Method 2: manually, by asking each user to provide a working access token
-
-**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
-
-When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
-
-- retrieve a Matrix access token for yourself. Refer to the documentation on [how to do that](obtaining-access-tokens.md).
-
-- send the access token to the bot. Example: `login-matrix MATRIX_ACCESS_TOKEN_HERE`
-
-- make sure you don't log out the `Mautrix-Hangouts` device some time in the future, as that would break the Double Puppeting feature
-
-
 ## Usage
 
 Once the bot is enabled you need to start a chat with `Hangouts bridge bot` with handle `@hangoutsbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).
@@ -54,4 +30,27 @@ Once logged in, recent chats should show up as new conversations automatically.
 
 You can learn more about authentication from the bridge's [official documentation on Authentication](https://docs.mau.fi/bridges/python/hangouts/authentication.html).
 
-After successfully enabling bridging, you may wish to [set up Double Puppeting](#set-up-double-puppeting), if you haven't already done so.
+### Set up Double Puppeting
+
+After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
+
+To set it up, you have 2 ways of going about it.
+
+#### Method 1: automatically, by enabling Shared Secret Auth
+
+The bridge will automatically perform Double Puppeting if you enable [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) for this playbook.
+
+This is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
+
+
+#### Method 2: manually, by asking each user to provide a working access token
+
+**Note**: This method for enabling Double Puppeting can be configured only after you've already set up bridging (see [Usage](#usage)).
+
+When using this method, **each user** that wishes to enable Double Puppeting needs to follow the following steps:
+
+- retrieve a Matrix access token for yourself. Refer to the documentation on [how to do that](obtaining-access-tokens.md).
+
+- send the access token to the bot. Example: `login-matrix MATRIX_ACCESS_TOKEN_HERE`
+
+- make sure you don't log out the `Mautrix-Hangouts` device some time in the future, as that would break the Double Puppeting feature

docs/configuring-playbook-bridge-mautrix-slack.md

@@ -28,17 +28,6 @@ matrix_mautrix_slack_enabled: true
 
 You may optionally wish to add some [Additional configuration](#additional-configuration), or to [prepare for double-puppeting](#set-up-double-puppeting) before the initial installation.
 
-## Installing
-
-After configuring the playbook, run the [installation](installing.md) command:
-
-```sh
-ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
-```
-
-To make use of the bridge, see [Usage](#usage) below.
-
-
 ### Additional configuration
 
 There are some additional options you may wish to configure with the bridge.
@@ -48,10 +37,27 @@ Take a look at:
 - `roles/custom/matrix-bridge-mautrix-slack/defaults/main.yml` for some variables that you can customize via your `vars.yml` file
 - `roles/custom/matrix-bridge-mautrix-slack/templates/config.yaml.j2` for the bridge's default configuration. You can override settings (even those that don't have dedicated playbook variables) using the `matrix_mautrix_slack_configuration_extension_yaml` variable
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command:
+
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
+
+## Usage
+
+1. Start a chat with `@slackbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).
+2. If you would like to login to Slack using a token, send the `login-token` command, otherwise, send the `login-password` command. Read [here](https://docs.mau.fi/bridges/go/slack/authentication.html) on how to retrieve your token and cookie token.
+3. The bot should respond with "Successfully logged into <email> for team <workspace>"
+4. Now that you're logged in, you can send a `help` command to the bot again, to see additional commands you have access to.
+5. Slack channels should automatically begin bridging if you authenticated using a token. Otherwise, you must wait to receive a message in the channel if you used password authentication.
 
 ### Set up Double Puppeting
 
-If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
+After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
+
+To set it up, you have 2 ways of going about it.
 
 #### Method 1: automatically, by enabling Appservice Double Puppet
 
@@ -70,12 +76,3 @@ When using this method, **each user** that wishes to enable Double Puppeting nee
 - send the access token to the bot. Example: `login-matrix MATRIX_ACCESS_TOKEN_HERE`
 
 - make sure you don't log out the `Mautrix-Slack` device some time in the future, as that would break the Double Puppeting feature
-
-
-## Usage
-
-1. Start a chat with `@slackbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).
-2. If you would like to login to Slack using a token, send the `login-token` command, otherwise, send the `login-password` command. Read [here](https://docs.mau.fi/bridges/go/slack/authentication.html) on how to retrieve your token and cookie token.
-3. The bot should respond with "Successfully logged into <email> for team <workspace>"
-4. Now that you're logged in, you can send a `help` command to the bot again, to see additional commands you have access to.
-5. Slack channels should automatically begin bridging if you authenticated using a token. Otherwise, you must wait to receive a message in the channel if you used password authentication.

docs/configuring-playbook-bridge-mautrix-twitter.md

@@ -18,22 +18,6 @@ matrix_mautrix_twitter_enabled: true
 
 After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
-## Set up Double Puppeting
-
-If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.
-
-### Method 1: automatically, by enabling Appservice Double Puppet or Shared Secret Auth
-
-The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service or the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
-
-Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
-
-Enabling double puppeting by enabling the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service works at the time of writing, but is deprecated and will stop working in the future.
-
-### Method 2: manually, by asking each user to provide a working access token
-
-This method is currently not available for the Mautrix-Twitter bridge, but is on the [roadmap](https://github.com/mautrix/twitter/blob/master/ROADMAP.md) under Misc/Manual login with `login-matrix`
-
 ## Usage
 
 1. You then need to start a chat with `@twitterbot:example.com` (where `example.com` is your base domain, not the `matrix.` domain).
@@ -41,4 +25,20 @@ This method is currently not available for the Mautrix-Twitter bridge, but is on
 
 You can learn more here about authentication from the bridge's [official documentation on Authentication](https://docs.mau.fi/bridges/python/twitter/authentication.html).
 
-After successfully enabling bridging, you may wish to [set up Double Puppeting](#set-up-double-puppeting), if you haven't already done so.
+### Set up Double Puppeting
+
+After successfully enabling bridging, you may wish to set up [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do).
+
+To set it up, you have 2 ways of going about it.
+
+#### Method 1: automatically, by enabling Appservice Double Puppet or Shared Secret Auth
+
+The bridge will automatically perform Double Puppeting if you enable the [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) service or the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service for this playbook.
+
+Enabling [Appservice Double Puppet](configuring-playbook-appservice-double-puppet.md) is the recommended way of setting up Double Puppeting, as it's easier to accomplish, works for all your users automatically, and has less of a chance of breaking in the future.
+
+Enabling double puppeting by enabling the [Shared Secret Auth](configuring-playbook-shared-secret-auth.md) service works at the time of writing, but is deprecated and will stop working in the future.
+
+#### Method 2: manually, by asking each user to provide a working access token
+
+This method is currently not available for the Mautrix-Twitter bridge, but is on the [roadmap](https://github.com/mautrix/twitter/blob/master/ROADMAP.md) under Misc/Manual login with `login-matrix`