Merge pull request #3597 from luixxiul/fix

Use common sentences on documentation regarding installation

docs/configuring-playbook-alertmanager-receiver.md

@@ -63,7 +63,7 @@ Steps 3 and 4 need to be done for each new room you'd like the bot to deliver al
 
 ## Installation
 
-Now that you've [prepared the bot account and room](#account-and-room-preparation) and have [configured the playbook](#configuration), you can re-run the [installation](./installing.md) process (`just install-all`).
+Now that you've [prepared the bot account and room](#account-and-room-preparation) and have [configured the playbook](#configuration), you can run the [installation](installing.md) command: `just install-all`
 
 Then, you can proceed to [Usage](#usage).
 

docs/configuring-playbook-appservice-double-puppet.md

@@ -14,4 +14,10 @@ To enable the Appservice Double Puppet service, add the following configuration
 matrix_appservice_double_puppet_enabled: true
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+
+## Usage
+
 When enabled, double puppeting will automatically be enabled for all bridges that support double puppeting via the appservice method.

docs/configuring-playbook-backup-borg.md

@@ -68,7 +68,7 @@ Check the [backup_borg role](https://github.com/mother-of-all-self-hosting/ansib
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command again:
+After configuring the playbook, run the [installation](installing.md) command:
 
 ```
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start

docs/configuring-playbook-bot-baibot.md

@@ -376,7 +376,7 @@ matrix_bot_baibot_config_initial_global_config_handler_image_generation: null
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command again:
+After configuring the playbook, run the [installation](installing.md) command:
 
 ```sh
 just run-tags install-all,ensure-matrix-users-created,start

docs/configuring-playbook-bot-buscarron.md

@@ -56,7 +56,7 @@ matrix_bot_buscarron_spamlist: [] # (optional) list of emails/domains/hosts (wit
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command again:
+After configuring the playbook, run the [installation](installing.md) command:
 
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start

docs/configuring-playbook-bot-chatgpt.md

@@ -57,7 +57,7 @@ You will need to get tokens for ChatGPT.
 
 ## 4. Installing
 
-After configuring the playbook, run the [installation](installing.md) command again:
+After configuring the playbook, run the [installation](installing.md) command:
 
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=install-all,start

docs/configuring-playbook-bot-honoroit.md

@@ -31,7 +31,7 @@ matrix_bot_honoroit_roomid: "!yourRoomID:DOMAIN"
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command again:
+After configuring the playbook, run the [installation](installing.md) command:
 
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start

docs/configuring-playbook-bot-matrix-registration-bot.md

@@ -34,7 +34,7 @@ The bot account will be created automatically.
 
 ## Installing
 
-After configuring the playbook, re-run the [installation](installing.md) command again: `just install-all` or `just setup-all`
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Usage
 

docs/configuring-playbook-bot-matrix-reminder-bot.md

@@ -27,7 +27,7 @@ matrix_bot_matrix_reminder_bot_reminders_timezone: Europe/London
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command again:
+After configuring the playbook, run the [installation](installing.md) command:
 
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start

docs/configuring-playbook-bot-maubot.md

@@ -30,7 +30,7 @@ You can add multiple admins. The admin accounts are only used to access the maub
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command again (`just install-all`):
+After configuring the playbook, run the [installation](installing.md) command: `just install-all`
 
 **Notes**:
 

docs/configuring-playbook-bot-postmoogle.md

@@ -54,7 +54,7 @@ See [Configuring DNS](configuring-dns.md).
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command again:
+After configuring the playbook, run the [installation](installing.md) command:
 
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start

docs/configuring-playbook-bridge-appservice-irc.md

@@ -60,4 +60,10 @@ matrix_appservice_irc_ircService_servers:
       lineLimit: 3
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+
+## Usage
+
 You then need to start a chat with `@irc_bot:YOUR_DOMAIN` (where `YOUR_DOMAIN` is your base domain, not the `matrix.` domain).

docs/configuring-playbook-bridge-appservice-kakaotalk.md

@@ -17,7 +17,13 @@ matrix_appservice_kakaotalk_enabled: true
 
 You may optionally wish to add some [Additional configuration](#additional-configuration), or to [prepare for double-puppeting](#set-up-double-puppeting) before the initial installation.
 
-After adjusting your `vars.yml` file, re-run the playbook and restart all services: `ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start`
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command:
+
+```
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
 
 To make use of the Kakaotalk bridge, see [Usage](#usage) below.
 

docs/configuring-playbook-bridge-beeper-linkedin.md

@@ -33,6 +33,9 @@ matrix_beeper_linkedin_configuration_extension_yaml: |
 
 You may wish to look at `roles/custom/matrix-bridge-beeper-linkedin/templates/config.yaml.j2` to find other things you would like to configure.
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Set up Double Puppeting by enabling Appservice Double Puppet or Shared Secret Auth
 

docs/configuring-playbook-bridge-go-skype-bridge.md

@@ -13,6 +13,9 @@ To enable the [Skype](https://www.skype.com/) bridge, add the following configur
 matrix_go_skype_bridge_enabled: true
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Usage
 

docs/configuring-playbook-bridge-heisenbridge.md

@@ -29,6 +29,10 @@ That's it! A registration file is automatically generated during the setup phase
 Setting the owner is optional as the first local user to DM `@heisenbridge:your-homeserver` will be made the owner.
 If you are not using a local user you must set it as otherwise you can't DM it at all.
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+
 ## Usage
 
 After the bridge is successfully running just DM `@heisenbridge:your-homeserver` to start setting it up.

docs/configuring-playbook-bridge-matrix-bridge-sms.md

@@ -31,6 +31,9 @@ matrix_sms_bridge_provider_android_truststore_password: 123
 
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-discord.md

@@ -25,7 +25,13 @@ matrix_mautrix_discord_enabled: true
 
 You may optionally wish to add some [Additional configuration](#additional-configuration), or to [prepare for double-puppeting](#set-up-double-puppeting) before the initial installation.
 
-After adjusting your `vars.yml` file, re-run the playbook and restart all services: `ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start`
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command:
+
+```
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
 
 To make use of the bridge, see [Usage](#usage) below.
 

docs/configuring-playbook-bridge-mautrix-facebook.md

@@ -47,6 +47,9 @@ matrix_mautrix_facebook_configuration_extension_yaml: |
 
 You may wish to look at `roles/custom/matrix-bridge-mautrix-facebook/templates/config.yaml.j2` and `roles/custom/matrix-bridge-mautrix-facebook/defaults/main.yml` to find other things you would like to configure.
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Set up Double Puppeting
 

docs/configuring-playbook-bridge-mautrix-gmessages.md

@@ -12,6 +12,10 @@ To enable the bridge, add the following configuration to your `inventory/host_va
 matrix_mautrix_gmessages_enabled: true
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+
 ## Set up Double Puppeting
 
 If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.

docs/configuring-playbook-bridge-mautrix-googlechat.md

@@ -12,6 +12,9 @@ To enable the [Google Chat](https://chat.google.com/) bridge, add the following
 matrix_mautrix_googlechat_enabled: true
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Set up Double Puppeting
 

docs/configuring-playbook-bridge-mautrix-hangouts.md

@@ -14,6 +14,9 @@ To enable the [Google Hangouts](https://hangouts.google.com/) bridge, add the fo
 matrix_mautrix_hangouts_enabled: true
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Set up Double Puppeting
 

docs/configuring-playbook-bridge-mautrix-instagram.md

@@ -40,6 +40,9 @@ matrix_mautrix_instagram_configuration_extension_yaml: |
 
 You may wish to look at `roles/custom/matrix-bridge-mautrix-instagram/templates/config.yaml.j2` and `roles/custom/matrix-bridge-mautrix-instagram/defaults/main.yml` to find other things you would like to configure.
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-meta-instagram.md

@@ -62,6 +62,10 @@ matrix_mautrix_meta_instagram_bridge_permissions_custom:
 
 You may wish to look at `roles/custom/matrix-bridge-mautrix-meta-instagram/templates/config.yaml.j2` to find more information on the permissions settings and other options you would like to configure.
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+
 ## Set up Double Puppeting
 
 If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.

docs/configuring-playbook-bridge-mautrix-meta-messenger.md

@@ -72,6 +72,10 @@ matrix_mautrix_meta_messenger_bridge_permissions_custom:
 
 You may wish to look at `roles/custom/matrix-bridge-mautrix-meta-messenger/templates/config.yaml.j2` to find more information on the permissions settings and other options you would like to configure.
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+
 ## Set up Double Puppeting
 
 If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.

docs/configuring-playbook-bridge-mautrix-signal.md

@@ -54,6 +54,10 @@ matrix_mautrix_signal_bridge_permissions:
 
 You may wish to look at `roles/custom/matrix-bridge-mautrix-signal/templates/config.yaml.j2` to find more information on the permissions settings and other options you would like to configure.
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+
 ## Set up Double Puppeting
 
 If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.

docs/configuring-playbook-bridge-mautrix-slack.md

@@ -28,7 +28,13 @@ matrix_mautrix_slack_enabled: true
 
 You may optionally wish to add some [Additional configuration](#additional-configuration), or to [prepare for double-puppeting](#set-up-double-puppeting) before the initial installation.
 
-After adjusting your `vars.yml` file, re-run the playbook and restart all services: `ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start`
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command:
+
+```
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
 
 To make use of the bridge, see [Usage](#usage) below.
 

docs/configuring-playbook-bridge-mautrix-telegram.md

@@ -14,6 +14,10 @@ matrix_mautrix_telegram_api_id: YOUR_TELEGRAM_APP_ID
 matrix_mautrix_telegram_api_hash: YOUR_TELEGRAM_API_HASH
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+
 ## Set up Double Puppeting
 
 If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.

docs/configuring-playbook-bridge-mautrix-twitter.md

@@ -14,6 +14,9 @@ To enable the bridge, add the following configuration to your `inventory/host_va
 matrix_mautrix_twitter_enabled: true
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Set up Double Puppeting
 

docs/configuring-playbook-bridge-mautrix-whatsapp.md

@@ -27,6 +27,10 @@ matrix_mautrix_whatsapp_bridge_relay_admin_only: false
 If you want to activate the relay bot in a room, use `!wa set-relay`.
 Use `!wa unset-relay` to deactivate.
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+
 ## Set up Double Puppeting
 
 If you'd like to use [Double Puppeting](https://docs.mau.fi/bridges/general/double-puppeting.html) (hint: you most likely do), you have 2 ways of going about it.

docs/configuring-playbook-bridge-mautrix-wsproxy.md

@@ -26,6 +26,9 @@ matrix_mautrix_wsproxy_syncproxy_shared_secret: 'secret token from bridge'
 
 Note that the tokens must match what is compiled into the [mautrix-imessage](https://github.com/mautrix/imessage) bridge running on your Mac or Android device.
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-discord.md

@@ -19,6 +19,9 @@ To enable the [Discord](https://discordapp.com/) bridge, add the following confi
 matrix_mx_puppet_discord_enabled: true
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-groupme.md

@@ -13,6 +13,9 @@ To enable the [GroupMe](https://groupme.com/) bridge, add the following configur
 matrix_mx_puppet_groupme_enabled: true
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-instagram.md

@@ -13,6 +13,9 @@ To enable the [Instagram](https://www.instagram.com/) bridge, add the following
 matrix_mx_puppet_instagram_enabled: true
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-steam.md

@@ -13,6 +13,9 @@ To enable the [Steam](https://steampowered.com/) bridge, add the following confi
 matrix_mx_puppet_steam_enabled: true
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-twitter.md

@@ -24,6 +24,9 @@ matrix_mx_puppet_twitter_access_token_secret: ''
 matrix_mx_puppet_twitter_environment: ''
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Usage
 

docs/configuring-playbook-bridge-wechat.md

@@ -12,6 +12,10 @@ To enable the bridge, add the following configuration to your `inventory/host_va
 matrix_wechat_enabled: true
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+
 ## Usage
 
 Once the bridge is installed, start a chat with `@wechatbot:YOUR_DOMAIN` (where `YOUR_DOMAIN` is your base domain, not the `matrix.` domain).

docs/configuring-playbook-cactus-comments.md

@@ -46,8 +46,7 @@ matrix_cactus_comments_client_enabled: true
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command again.
-
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Usage
 

docs/configuring-playbook-client-cinny.md

@@ -4,18 +4,26 @@ This playbook can install the [cinny](https://github.com/ajbura/cinny) Matrix we
 Cinny is a web client focusing primarily on simple, elegant and secure interface.
 Cinny can be installed alongside or instead of Element.
 
-If you'd like Cinny to be installed, add the following to your configuration file (`inventory/host_vars/matrix.<your-domain>/vars.yml`):
+## DNS
+
+You need to add a `cinny.DOMAIN` DNS record so that Cinny can be accessed.
+By default Cinny will use https://cinny.DOMAIN so you will need to create an CNAME record
+for `cinny`. See [Configuring DNS](configuring-dns.md).
+
+If you would like to use a different domain, add the following configuration to your `inventory/host_vars/matrix.DOMAIN/vars.yml` file (changing it to use your preferred domain):
+
+```yaml
+ matrix_server_fqn_cinny: "app.{{ matrix_domain }}"
+```
+
+## Adjusting the playbook configuration
+
+To enable Cinny, add the following configuration to your `inventory/host_vars/matrix.DOMAIN/vars.yml` file:
 
 ```yaml
 matrix_client_cinny_enabled: true
 ```
 
-You will also need to add a DNS record so that Cinny can be accessed.
-By default Cinny will use https://cinny.DOMAIN so you will need to create an CNAME record
-for `cinny`. See [Configuring DNS](configuring-dns.md).
+## Installing
 
-If you would like to use a different domain, add the following to your configuration file (changing it to use your preferred domain):
-
-```yaml
- matrix_server_fqn_cinny: "app.{{ matrix_domain }}"
-```
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`

docs/configuring-playbook-client-element.md

@@ -1,6 +1,6 @@
 # Configuring Element (optional)
 
-By default, this playbook installs the [Element](https://github.com/element-hq/element-web) Matrix client web application.
+By default, this playbook installs the [Element](https://github.com/element-hq/element-web) Matrix web client for you.
 If that's okay, you can skip this document.
 
 

docs/configuring-playbook-client-hydrogen.md

@@ -4,18 +4,26 @@ This playbook can install the [Hydrogen](https://github.com/element-hq/hydrogen-
 Hydrogen is a lightweight web client that supports mobile and legacy web browsers.
 Hydrogen can be installed alongside or instead of Element.
 
-If you'd like Hydrogen to be installed, add the following to your configuration file (`inventory/host_vars/matrix.<your-domain>/vars.yml`):
+## DNS
+
+You need to add a `hydrogen.DOMAIN` DNS record so that Hydrogen can be accessed.
+By default Hydrogen will use https://hydrogen.DOMAIN so you will need to create an CNAME record
+for `hydrogen`. See [Configuring DNS](configuring-dns.md).
+
+If you would like to use a different domain, add the following configuration to your `inventory/host_vars/matrix.DOMAIN/vars.yml` file (changing it to use your preferred domain):
+
+```yaml
+ matrix_server_fqn_hydrogen: "helium.{{ matrix_domain }}"
+```
+
+## Adjusting the playbook configuration
+
+To enable Hydrogen, add the following configuration to your `inventory/host_vars/matrix.DOMAIN/vars.yml` file:
 
 ```yaml
 matrix_client_hydrogen_enabled: true
 ```
 
-You will also need to add a DNS record so that Hydrogen can be accessed. 
-By default Hydrogen will use https://hydrogen.DOMAIN so you will need to create an CNAME record
-for `hydrogen`. See [Configuring DNS](configuring-dns.md).
+## Installing
 
-If you would like to use a different domain, add the following to your configuration file (changing it to use your preferred domain):
-
-```yaml
- matrix_server_fqn_hydrogen: "helium.{{ matrix_domain }}"
-```
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`

docs/configuring-playbook-client-schildichat.md

@@ -1,21 +1,31 @@
 # Configuring SchildiChat (optional)
 
-By default, this playbook does not install the [SchildiChat](https://github.com/SchildiChat/schildichat-desktop) Matrix client web application.
+This playbook can install the [SchildiChat](https://github.com/SchildiChat/schildichat-desktop) Matrix web client for you.
+SchildiChat is a feature-rich messenger for Matrix based on Element with some extras and tweaks.
+SchildiChat can be installed alongside or instead of Element.
 
 **WARNING**: SchildiChat Web is based on Element-web, but its releases are lagging behind. As an example (from 2024-02-26), SchildiChat Web is 22 releases behind (it being based on element-web `v1.11.36`, while element-web is now on `v1.11.58`). Element-web frequently suffers from security issues, so running something based on an ancient Element-web release is **dangerous**. Use SchildiChat Web at your own risk!
 
+## DNS
 
-## Enabling SchildiChat
+You need to add a `schildichat.DOMAIN` DNS record so that SchildiChat can be accessed.
+By default SchildiChat will use https://schildichat.DOMAIN so you will need to create an CNAME record
+for `schildichat`. See [Configuring DNS](configuring-dns.md).
 
-If you'd like for the playbook to install SchildiChat, you can enable it in your configuration file (`inventory/host_vars/matrix.<your-domain>/vars.yml`):
+If you would like to use a different domain, add the following configuration to your `inventory/host_vars/matrix.DOMAIN/vars.yml` file (changing it to use your preferred domain):
+
+```yaml
+ matrix_server_fqn_schildichat: "sc.{{ matrix_domain }}"
+```
+
+## Adjusting the playbook configuration
+
+To enable SchildiChat, add the following configuration to your `inventory/host_vars/matrix.DOMAIN/vars.yml` file:
 
 ```yaml
 matrix_client_schildichat_enabled: true
 ```
 
-
-## Configuring SchildiChat settings
-
 The playbook provides some customization variables you could use to change schildichat's settings.
 
 Their defaults are defined in [`roles/custom/matrix-client-schildichat/defaults/main.yml`](../roles/custom/matrix-client-schildichat/defaults/main.yml) and they ultimately end up in the generated `/matrix/schildichat/config.json` file (on the server). This file is generated from the [`roles/custom/matrix-client-schildichat/templates/config.json.j2`](../roles/custom/matrix-client-schildichat/templates/config.json.j2) template.
@@ -30,8 +40,7 @@ Alternatively, **if there is no pre-defined variable** for an schildichat settin
 
 - or, if extending the configuration is still not powerful enough for your needs, you can **override the configuration completely** using `matrix_client_schildichat_configuration_default` (or `matrix_client_schildichat_configuration`). You can find information about this in [`roles/custom/matrix-client-schildichat/defaults/main.yml`](../roles/custom/matrix-client-schildichat/defaults/main.yml).
 
-
-## Themes
+### Themes
 
 To change the look of schildichat, you can define your own themes manually by using the `matrix_client_schildichat_setting_defaults_custom_themes` setting.
 
@@ -40,3 +49,7 @@ Or better yet, you can automatically pull it all themes provided by the [aaronra
 If you make your own theme, we encourage you to submit it to the **aaronraimist/element-themes** project, so that the whole community could easily enjoy it.
 
 Note that for a custom theme to work well, all schildichat instances that you use must have the same theme installed.
+
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`

docs/configuring-playbook-etherpad.md

@@ -40,8 +40,9 @@ etherpad_enabled: true
 # etherpad_admin_password: some-password
 ```
 
-Then, [run the installation process](installing.md) again (e.g. `just install-all`).
+## Installing
 
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Usage
 

docs/configuring-playbook-jitsi.md

@@ -17,7 +17,7 @@ You may also need to open the following ports to your server:
 - `10000/udp` - RTP media over UDP. Depending on your firewall/NAT setup, incoming RTP packets on port `10000` may have the external IP of your firewall as destination address, due to the usage of STUN in JVB (see [`jitsi_jvb_stun_servers`](https://github.com/mother-of-all-self-hosting/ansible-role-jitsi/blob/main/defaults/main.yml)).
 
 
-## Installation
+## Adjusting the playbook configuration
 
 Add the following configuration to your `inventory/host_vars/matrix.DOMAIN/vars.yml` file:
 
@@ -271,10 +271,13 @@ jitsi_disable_gravatar: false
 **Beware:** This leaks information to a third party, namely the Gravatar-Service (unless configured otherwise: gravatar.com).
 Besides metadata, this includes the matrix user_id and possibly the room identifier (via `referrer` header).
 
-## Apply changes
+## Installing
 
-Then re-run the playbook: `ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start`
+After configuring the playbook, run the [installation](installing.md) command:
 
+```
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
+```
 
 ## Usage
 

docs/configuring-playbook-ma1sd.md

@@ -35,6 +35,9 @@ matrix_ma1sd_matrixorg_forwarding_enabled: true
 If you'd like to change the default email templates used by ma1sd, take a look at the `matrix_ma1sd_threepid_medium_email_custom_` variables
 (in the `roles/custom/matrix-ma1sd/defaults/main.yml` file.
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## ma1sd-controlled Registration
 

docs/configuring-playbook-matrix-corporal.md

@@ -115,7 +115,9 @@ aux_file_definitions:
 
 To learn more about what the policy configuration, see the matrix-corporal documentation on [policy](https://github.com/devture/matrix-corporal/blob/master/docs/policy.md).
 
-Each time you update the policy in your `vars.yml` file, you'd need to re-run the playbook and restart matrix-corporal (`--tags=setup-all,start` or `--tags=setup-aux-files,setup-corporal,start`).
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command (`--tags=setup-all,start` or `--tags=setup-aux-files,setup-corporal,start`).
 
 
 ## Matrix Corporal files

docs/configuring-playbook-matrix-ldap-registration-proxy.md

@@ -34,3 +34,6 @@ matrix_ldap_registration_proxy_systemd_wanted_services_list_custom:
   - matrix-synapse.service
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`

docs/configuring-playbook-matrix-registration.md

@@ -17,9 +17,9 @@ Use matrix-registration to **create unique registration links**, which people ca
 - **a user registration page**, where people can use these registration tokens. By default, exposed at `https://matrix.DOMAIN/matrix-registration`
 
 
-## Installing
+## Adjusting the playbook configuration
 
-Adjust your playbook configuration (your `inventory/host_vars/matrix.DOMAIN/vars.yml` file):
+Add the following configuration to your `inventory/host_vars/matrix.DOMAIN/vars.yml` file:
 
 ```yaml
 matrix_registration_enabled: true
@@ -28,7 +28,9 @@ matrix_registration_enabled: true
 matrix_registration_admin_secret: "ENTER_SOME_SECRET_HERE"
 ```
 
-Then, run the [installation](installing.md) command again:
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command:
 
 ```
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start

docs/configuring-playbook-mautrix-bridges.md

@@ -92,6 +92,9 @@ Can be used to set the username for the bridge.
 
 You may wish to look at `roles/custom/matrix-bridge-mautrix-SERVICENAME/templates/config.yaml.j2` and `roles/custom/matrix-bridge-mautrix-SERVICENAME/defaults/main.yml` to find other things you would like to configure.
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Set up Double Puppeting
 

docs/configuring-playbook-ntfy.md

@@ -38,7 +38,7 @@ For a complete list of ntfy config options that you could put in `ntfy_configura
 
 Don't forget to add `ntfy.<your-domain>` to DNS as described in [Configuring DNS](configuring-dns.md) before running the playbook.
 
-After configuring the playbook, run the [installation](installing.md) command again:
+After configuring the playbook, run the [installation](installing.md) command:
 
 ```
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start

docs/configuring-playbook-pantalaimon.md

@@ -18,4 +18,4 @@ The default configuration should suffice. For advanced configuration, you can ov
 
 ## 2. Installing
 
-After configuring the playbook, run the [installation](installing.md) command.
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`

docs/configuring-playbook-postgres-backup.md

@@ -29,7 +29,7 @@ Refer to the table below for additional configuration variables and their defaul
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command again:
+After configuring the playbook, run the [installation](installing.md) command:
 
 ```
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start

docs/configuring-playbook-prometheus-nginxlog.md

@@ -20,7 +20,9 @@ Add the following configuration to your `inventory/host_vars/matrix.DOMAIN/vars.
 matrix_prometheus_nginxlog_exporter_enabled: true
 ```
 
-Then, re-run the playbook. See [installation](./installing.md).
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
 
 ## Docker Image Compatibility
 

docs/configuring-playbook-prometheus-postgres.md

@@ -10,6 +10,10 @@ To enable the postgres exporter, add the following configuration to your `invent
 prometheus_postgres_exporter_enabled: true
 ```
 
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`
+
 ## What does it do?
 
 Name | Description

docs/configuring-playbook-rageshake.md

@@ -51,7 +51,7 @@ matrix_rageshake_configuration_extension_yaml: |
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command again:
+After configuring the playbook, run the [installation](installing.md) command:
 
 ```
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start

docs/configuring-playbook-rest-auth.md

@@ -23,3 +23,7 @@ If you wish for users to **authenticate only against configured password provide
 ```yaml
 matrix_synapse_password_config_localdb_enabled: false
 ```
+
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`

docs/configuring-playbook-riot-web.md

@@ -30,5 +30,4 @@ There are a few options for handling this:
 
 ### Re-running the playbook
 
-As always, after making the necessary DNS and configuration adjustments, [re-run the playbook](./installing.md) to apply the changes.
-```
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`

docs/configuring-playbook-shared-secret-auth.md

@@ -23,3 +23,7 @@ If you wish for users to **authenticate only against configured password provide
 ```yaml
 matrix_synapse_password_config_localdb_enabled: false
 ```
+
+## Installing
+
+After configuring the playbook, run the [installation](installing.md) command: `just install-all` or `just setup-all`

docs/configuring-playbook-synapse-admin.md

@@ -25,7 +25,7 @@ By default, synapse-admin installation will be [restricted to only work with one
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command again (`just install-all`).
+After configuring the playbook, run the [installation](installing.md) command: `just install-all`
 
 
 ## Usage

docs/configuring-playbook-synapse-auto-compressor.md

@@ -18,7 +18,7 @@ matrix_synapse_auto_compressor_enabled: true
 
 ## Installing
 
-After configuring the playbook, run the [installation](installing.md) command again:
+After configuring the playbook, run the [installation](installing.md) command:
 
 ```
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start