tar is slower and harder to diff. I doubt any one still uses it intentially.
There's a chance some people have not cleared their cache in two years
and still have tar based packages around. But forcing them to clear
their cache is not a big deal at all.
Adds (mostly) complete -Sl support. While pacman will also print the
version number for the package, packages.gz does not give version
numbers. Using -Si to fetch all that data would also be unthinkable.
Instead of just missing out the version number yay will print
"unknown-version". This is so that tools that expect a version number do
not break.
This makes more sense and falls in line with the structs value which has
always been cleanafter. afterclean is still useable for compatibility
but is undocumented.
Normaly we only pass --config to pacman if the user specifies it on the
command line. Otherwise we let pacman use it's default config location.
If the user has changed pacmanconf in Yay's config file then this could
cause a miss match between the config we use to init alpm and the config
pacman is using.
Bash seperates on whitespace, so the fish completion file
actually works for bash and zsh. So remove the concept of shells
entirley and just use the singular aur_sh.cache file.
If for some reason output without the repository data is needed, the
user could always just pipe it into awk like so
`yay -Pc | awk '{print $1}'`. Or perhaps a --quiet option could be added
where yay will strip the output itself.
The completion cache now updates when installing AUR packages. This is
done as a goroutine with no wait groups. This ensures the program will
never hang if there is a problem.
The completion is stil updated during -Pc but as long as an AUR package
has been installed recently it should not need to update.
The cache will now also wait 7 days instead of 2 before refreshing.
A refresh can be forced using -Pcc.
Currently we do not handle -Sp, this leads to yay trying a proper
install and failing. So instead pass it to pacman and exit. Ideally we
would extend -Sp to include AUR packages but for now don't bother.
As it turns out, the times you need root also tend to be the time you
need to manipulate the database. So the needWait() function can be
removed and repllaced by needRoot()
Previously each call to an external command had two functions.
PassToFoo() and PassToFooCapture(). These functions are always similar
and end up with duplicated code.
So instead have the passToFoo() functions return the cmd itself and
create small helper functions show() and capture() which will run the
command and either forward it to std{out,err,in} or capture the output
Also the saveVCSInfo() function which was called after every makepkg
call is now only called after the pacman -U succeeds.
Currently When performing a system upgrade, Yay will first refresh the
database then perform the repo and AUR upgrade. This allows Yay to add
some features such as better batch interaction, showing potential
dependency problems before the upgrade starts and combined menus
showing AUR and repo upgrades together.
There has been discussion that this approach is a bad idea. The main issue
people have is that the separation of the database refresh and the upgrade
could lead to a partial upgrade if Yay fails between the two stages.
Personally I do not like this argument, there are valid reasons to Yay
to fail between these points. For example there may be dependency or
conflict issues during the AUR upgrade. Yay can detect these before any
installing actually starts and exit, just like how pacman will when
there are dependency problems.
If Yay does fail between these points, for the previously mentioned
reasons or even a crash then a simple refresh will not cause a
partial upgrade by itself. It is then the user's responsibility
to either resolve these issues or instead perform an upgrade using
pacman directly.
My opinions aside, The discussions on the Arch wiki has reached
a decision, this method is not recommended. So to follow the decided
best practises this behaviour has been disabled by default.
This behaviour can be toggled using the --[no]combinedupgrade flag
It should be noted that Yay's upgrade menu will not show repo packages
unless --combinedupgrade is used.
--ask is no longer used when installing AUR packages, instead pass no
confirm when we know there are no conflicts and wait for manual
confirmation when there are.
This means that when there are no conflicts there should be no change in
behaviour and the user will not need to intervene at all.
The old behaviour can still be used with --useask.
Clean build needs to happen before downloading pkgbuilds so that they
can be deletd before downloading.
Editing and diff viewing needs to happen after downloading the
pkgbuilds.
Prevously we asked to clean and edit at the same time. Then clean,
download pkgbuilds and open the editor.
This poeses a problem for diff viewing and editing. It's likley that the
user will see the diff and use that to decide if they want to edit the
pkgbuild. Using the current method, the user will be asked to view diffs
and edit before actually seeing any diffs.
Instead split cleaning diff showing and editing to three seperate menus
in the following order:
show clean menu
clean
download pkgbuilds
show diff menu
show diffs
show edit menu
edit pkgbuilds
Also each menu is seperatly enableable. By default only the diff menu is
shows. If the user wishes to clean build, edit pkgbuilds or disable
diffs then the user can use the --[no]{clean,diff,edit}menu flags. This
replaces the --[no]showdiffs flags.
The order of targets does somewhat matter. For example doing something
like 'pacman -S db1/foo db2/foo' should cause the second package to be
skipped.
The order of targets also effects in which order they are resolved. This
should make errors more reproducable if any ever occur.
diff viewing can be toggled via --[no]showdiffs. When enabled diffs will
be shown for packages between the current HEAD and upstream's HEAD.
Packages downloaded via tarballs will be shown in full using the editor
git diff is used to show diffs. Therefore the pager for diffs can be
set via the PAGER and GIT_PAGER enviroment variables.
These flags limit operations to only check the repos or only check the
AUR. These flags apply to -S, -Si and -Su.
-a may also be used as a short option for --aur. --repo has no short
option as -r is taken.
-Sc will delete cached AUR data from Yay's build dir according to
the `CleanMethod` specified in the Pacman config file.
-Scc will delete all cached AUR data.
Additionally -Sc will also delete all untracked files in the AUR cache.
This will delete things such as downloaded sources and built packages
but will leave directories behind.
This is very usefull because the only reason a directoiry should exist
in the cache is because of downloaded VCS sources. Non VCS sources are
redownloaded every update because when a new version is released a new
tarball has to be downloaded. But VCS sources are never redownloaded,
updates are simply pulled. For this reason the user probably wants to
keep this data as it is still usefull even after building and installing
a package.
Use git clone over tarballs for pkgbuild downloading during -S. This
option can still be toggled using the config flags.
The config option for selecting clone or tarball will be overiden if an
existing package is cached. The method used to download the package
perviously will be used regardless of the config.
Previously we ran pkgver() right after dowloading sources. This is
a problem because prepare() should be called and all dependencies
should be installed before pkgver().
Instead bump the pkgver while building then get the new pkgver used for
install. Previously we parsed `makepkg --printsrcinfo` to get the new
version. Insead use `makepkg --packagelist` as it is much faster.
Allows searching the RPC for words that may be too short or have
too many results as long as another word in the search will work.
If no words can be used without error then the last error will be
returned and the program will exit.
add22f5957 added error checks to all the
passToPacman commands. This makes `yay -Q nonexistantpackage` return
non 0 as it should. Annoyingly it also made yay print `exit status = n`
which is the error string from passToPacman calls. This error doesn't
add much and is quite annoying, expecially when calling pacman commands
like `-Q` or `-Si` where yay should be kind of 'hidden' and print just
like pacman does.
Now set the error string to "" for pacman commands and don't print an
error if it == "" (avoids empty line printed).
Also behave more like pacman when using `yay -Qu`.
-Qu now has AUR support, it functions identically to `-Pu` and may replace
it in the futre.
Aditionally the pacman options `-n` and `-m` are also supported to
filter out native and non native packages. Other flags are not supported
currently.
Using any other `-Q` will fallback to Pacman.
The callback is set to allways silently say yes, When passing to pacman
for the intall pacman will then ask the question giving the user
a chance to answer.
Similar to the --redownload flag, when specifed targets will be rebuilt
even if an up to date version is cached. --rebuildall can be used to
ensure uninstalled dependencies are rebuilt as well.
Additionally, unlike --redownload there is also --rebuildtree. This
causes a rebuild and reinstall of a package and all of it's dependencies
recursivley. This is designed for when a libary updae, breaks an
installed AUR package due to a partial upgrade. polybar is a common
example
--rebuild allows you to easily skip the cache and rebuild against a newer
libary version. --rebuildtree is a more nuclear option where you can
rebuild the whole dependency tree.
Adds the ability to pick which database to install a package from. This
is extended to also support for AUR packages. For example `extra/git`
and `aur/yay` should both work`. When not explicitly requesting
a database repo packages will be choosen over the AUR.
This features extends to yogurt mode, listings where a package shows up
in multiple database/the AUR is now handled.
The aur does not have a real pacman databse like core, extra ect. But
can be accessed as if was one with `aur/name`. Using Yay with a pacman
repository named "aur" is undefined.
With this The user should never have to manually edit the yay config
file. All options can be set directly through yay using
`yay --<option> <value> --save`
Before setting options such as --topdown would be saved to the config
file automaticly when used. Now this is no longer done by default and
isntead the --save flag must be passed for this to happen.
If --save is passed the config is now saved as soon as the argument
parsing is finished apposed to before where it was saved when yay exits.
This means that config changes will now apply if the user does a ^C
before yay finishes.
If a pkgbuild is already in cache and matches the version on
the aur skip the download.
The version we check comes from the .SRCINFO file on disk which is never
updated. (updates through pkgver() edit the pkgbuild but do not effect
the .SRCINFO). Therefore if the the version of the .SRCINFO matches the
AUR's version there must not be an update.
In the case of the on disk version being newer than the AUR version we
can assume user interaction and they probably do not want it overwitten
so in that case also skip the download.
Use the command `git ls-remote <url> <branch>` to track devel updates
rather than relying on the GitHub API.
This allows devel update to work for every git based source and
elimantes the rate limiting from GitHub.
The yay_vcs.json format has changed to better support packages which
multiple vcs sources and to track the protocols each source uses. And
track the branch that each source tracks in it's fragment.
Add ( and ) to "installed" to match groups and out of date
Show popularity as well as voted in yogurt mode
Show download and install size in yogurt mode
Remove printing of white and black
Fix incorrect message on number menu
Yellow is now almost never used
Use `v` instead of `r` when printing version
show when a page was marked out of date on search and info
Reword a lot of manpage and usage options.
Remove the `-Yg` and `-Y --getpkgbuild` options from documentation and
code as they have moved to `-G` and `--getpgkbuild`.
Update the version in the man page. Because our version is based on our
commit number added a `+` after the version number to indicated that
this is the version the manpage was written at but it also applies to
newer versions.
Added missing `-c --complete` and `-f --fish` options to the manpage.
But left them out of usage.
Added myself to the authors section. I do feel a bit bad about adding
myself and only myself but I thought it was not a good idea to add 20
names and fill up the page. There's currently no rules on who should be
added and not really a huge need for them right now. I guess we can just
add more people when we deem they belong there whatever that criteria
is.
Save the VSC Info as soon as the package install finishes. This should
ensure the VSC db does not end up in an incorrect state if an install
fails or is cancelled by the user.
This also adds better support for split packages. When one or more
packages are installed from the same base each individual package is
added to the db not just the base. This allows us to track individual
updates from the same base so that if one package gets updated we don't
assume all packages in the base are updated.
This commit mostly focuses on merging the install() and upgradePkgs()
functions to be more integrated. Instead of both making their own aur
queries they now both combine theyre needes into one query. This gives
us a speed up and allows us to easily print orphands, misising and out
of date in one clean block.
