mirror of
https://github.com/rtlsdrblog/rtl-sdr-blog.git
synced 2024-12-27 03:18:30 +01:00
8a26abaf79
This allows (among others) to build rtl-sdr nightly packages for a variety of distributions as part of the network:osmocom:nightly builds
82 lines
3.2 KiB
Groff
82 lines
3.2 KiB
Groff
.TH "rtl_tcp" 1 "0.5.0" RTL-SDR "User Commands"
|
||
.SH NAME
|
||
rtl_tcp \- an I/Q spectrum server for RTL2832 based DVB-T receivers
|
||
.SH DESCRIPTION
|
||
Uses a re-purposed DVB-T receiver as a software defined
|
||
radio to receive and send I/Q data via TCP network to another
|
||
demodulation, decoding or logging apllication. Written for
|
||
and incorporated into the osmocom rtl-sdr project.
|
||
.LP
|
||
Much software is available for the RTL2832. Most of the user-level
|
||
packages rely on the librtlsdr library which comes as part of the
|
||
rtl-sdr codebase. This codebase contains both the library itself and
|
||
also a number of command line tools such as rtl_test, rtl_sdr,
|
||
rtl_tcp, and rtl_fm. These command line tools use the library to test
|
||
for the existence of RTL2832 devices and to perform basic data
|
||
transfer functions to and from the device.
|
||
.LP
|
||
Because most of the RTL2832 devices are connected using USB, the
|
||
librtlsdr library depends on the libusb library to communicate with
|
||
the device.
|
||
.SH USAGE
|
||
Run this program on a machine with an rtl-sdr supported
|
||
device connected and it will provide I/Q data to other applications
|
||
via TCP/IP.
|
||
.SH SYNOPSIS
|
||
.B rtl_tcp [OPTIONS]
|
||
.SH OPTIONS
|
||
.IP "-a listen address"
|
||
.IP "-p listen port (default: 1234)"
|
||
.IP "-f frequency to tune to [Hz]"
|
||
.IP "-g gain (default: 0 for auto)"
|
||
.IP "-s samplerate in Hz (default: 2048000 Hz)"
|
||
.IP "-b number of buffers (default: 32, set by library)"
|
||
.IP "-n max number of linked list buffers to keep (default: 500)"
|
||
.IP "-d device_index (default: 0)"
|
||
.IP "-P ppm_error (default: 0)"
|
||
.SH Example:
|
||
.IP "rtl_tcp -a 10.0.0.2 [-p listen port (default: 1234)]"
|
||
Found 1 device(s).
|
||
Found Elonics E4000 tuner
|
||
Using Generic RTL2832U (e.g. hama nano)
|
||
Tuned to 100000000 Hz.
|
||
listening...
|
||
.LP
|
||
Use the device argument 'rtl_tcp=10.0.0.2:1234' in OsmoSDR (gr-osmosdr) source
|
||
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).
|
||
.LP
|
||
use the rtl_tcp=... device argument in gr-osmosdr source to receive
|
||
the samples in GRC and control the rtl settings remotely.
|
||
.LP
|
||
This application has been successfully crosscompiled for ARM and MIPS
|
||
devices and is providing IQ data in a networked ADS-B setup at a rate
|
||
of 2.4MSps. The gr-osmosdr source is being used together with an
|
||
optimized gr-air-modes version (see Known Apps below). It is also
|
||
available as a package in OpenWRT.
|
||
.LP
|
||
A use case is described https://sites.google.com/site/embrtlsdr/
|
||
.SH SEE ALSO
|
||
gnuradio(1)
|
||
.LP
|
||
RTL-SDR wiki documentation:
|
||
.B http://sdr.osmocom.org/trac/wiki/rtl-sdr
|
||
.LP
|
||
Other rtl-sdr programs:
|
||
.sp
|
||
rtl_adsb(1), rtl_eeprom(1), rtl_fm(1), rtl_sdr(1), rtl_test(1)
|
||
.SH AUTHOR
|
||
This manual page was written by Maitland Bottoms
|
||
for the Debian project (but may be used by others).
|
||
.SH COPYRIGHT
|
||
Copyright (c) 2013 A. Maitland Bottoms <bottoms@debian.org>
|
||
.LP
|
||
This program is free software: you can redistribute it and/or modify
|
||
it under the terms of the GNU General Public License as published by
|
||
the Free Software Foundation, either version 2 of the License, or
|
||
(at your option) any later version.
|
||
.LP
|
||
This program is distributed in the hope that it will be useful,
|
||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
GNU General Public License for more details.
|