Merge pull request #3595 from luixxiul/fix

Fix strings and capitalization

docs/configuring-dns.md

@@ -75,7 +75,7 @@ The `etherpad.<your-domain>` subdomain may be necessary, because this playbook c
 
 The `hydrogen.<your-domain>` subdomain may be necessary, because this playbook could install the [Hydrogen](https://github.com/element-hq/hydrogen-web) web client. The installation of Hydrogen is disabled by default, it is not a core required component. To learn how to install it, see our [configuring Hydrogen guide](configuring-playbook-client-hydrogen.md). If you do not wish to set up Hydrogen, feel free to skip the `hydrogen.<your-domain>` DNS record.
 
-The `cinny.<your-domain>` subdomain may be necessary, because this playbook could install the [Cinny](https://github.com/ajbura/cinny) web client. The installation of cinny is disabled by default, it is not a core required component. To learn how to install it, see our [configuring cinny guide](configuring-playbook-client-cinny.md). If you do not wish to set up cinny, feel free to skip the `cinny.<your-domain>` DNS record.
+The `cinny.<your-domain>` subdomain may be necessary, because this playbook could install the [Cinny](https://github.com/ajbura/cinny) web client. The installation of Cinny is disabled by default, it is not a core required component. To learn how to install it, see our [configuring Cinny guide](configuring-playbook-client-cinny.md). If you do not wish to set up Cinny, feel free to skip the `cinny.<your-domain>` DNS record.
 
 The `wsproxy.<your-domain>` subdomain may be necessary, because this playbook could install the [wsproxy](https://github.com/mautrix/wsproxy) web client. The installation of wsproxy is disabled by default, it is not a core required component. To learn how to install it, see our [configuring wsproxy guide](configuring-playbook-bridge-mautrix-wsproxy.md). If you do not wish to set up wsproxy, feel free to skip the `wsproxy.<your-domain>` DNS record.
 

docs/configuring-playbook-bot-draupnir.md

@@ -47,7 +47,7 @@ Using your own account, create a new invite only room that you will use to manag
 
 If you make the management room encrypted (E2EE), then you MUST enable and use Pantalaimon (see below).
 
-Once you have created the room you need to copy the room ID so you can tell the bot to use that room. In Element you can do this by going to the room's settings, clicking Advanced, and then coping the internal room ID. The room ID will look something like `!QvgVuKq0ha8glOLGMG:DOMAIN`.
+Once you have created the room you need to copy the room ID so you can tell the bot to use that room. In Element you can do this by going to the room's settings, clicking Advanced, and then copying the internal room ID. The room ID will look something like `!QvgVuKq0ha8glOLGMG:DOMAIN`.
 
 Finally invite the `@bot.draupnir:DOMAIN` account you created earlier into the room.
 
@@ -109,7 +109,7 @@ matrix_bot_draupnir_management_room: "ROOM_ID_FROM_STEP_4_GOES_HERE"
 
 ### 5c. Migrating from Mjolnir (Only required if migrating.)
 
-Replace your `matrix_bot_mjolnir` config with `matrix_bot_draupnir` config. Also disable mjolnir if you're doing migration.
+Replace your `matrix_bot_mjolnir` config with `matrix_bot_draupnir` config. Also disable Mjolnir if you're doing migration.
 That is all you need to do due to that Draupnir can complete migration on its own.
 
 ## 6. Installing

docs/configuring-playbook-bot-maubot.md

@@ -34,9 +34,7 @@ After configuring the playbook, run the [installation](installing.md) command ag
 
 **Notes**:
 
-- if you change the bot password (`matrix_bot_maubot_initial_password` in your `vars.yml` file) subsequently,
-  the bot user's credentials on the homeserver won't be updated automatically.
-  If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it.
+- if you change the bot password (`matrix_bot_maubot_initial_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_maubot_initial_password` to let the bot know its new password
 
 ## Usage
 

docs/configuring-playbook-bot-mjolnir.md

@@ -41,7 +41,7 @@ Using your own account, create a new invite only room that you will use to manag
 
 If you make the management room encrypted (E2EE), then you MUST enable and use Pantalaimon (see below).
 
-Once you have created the room you need to copy the room ID so you can tell the bot to use that room. In Element you can do this by going to the room's settings, clicking Advanced, and then coping the internal room ID. The room ID will look something like `!QvgVuKq0ha8glOLGMG:DOMAIN`.
+Once you have created the room you need to copy the room ID so you can tell the bot to use that room. In Element you can do this by going to the room's settings, clicking Advanced, and then copying the internal room ID. The room ID will look something like `!QvgVuKq0ha8glOLGMG:DOMAIN`.
 
 Finally invite the `@bot.mjolnir:DOMAIN` account you created earlier into the room.
 
@@ -101,7 +101,7 @@ matrix_bot_mjolnir_access_token: "ACCESS_TOKEN_FROM_STEP_2_GOES_HERE"
 matrix_bot_mjolnir_management_room: "ROOM_ID_FROM_STEP_4_GOES_HERE"
 ```
 
-## 6. Adding mjolnir synapse antispam module (optional)
+## 6. Adding Mjolnir synapse antispam module (optional)
 
 Add the following configuration to your `inventory/host_vars/matrix.DOMAIN/vars.yml` file (adapt to your needs):
 
@@ -126,11 +126,11 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 ## Usage
 
-You can refer to the upstream [documentation](https://github.com/matrix-org/mjolnir) for additional ways to use and configure mjolnir. Check out their [quickstart guide](https://github.com/matrix-org/mjolnir#quickstart-guide) for some basic commands you can give to the bot.
+You can refer to the upstream [documentation](https://github.com/matrix-org/mjolnir) for additional ways to use and configure Mjolnir. Check out their [quickstart guide](https://github.com/matrix-org/mjolnir#quickstart-guide) for some basic commands you can give to the bot.
 
 You can configure additional options by adding the `matrix_bot_mjolnir_configuration_extension_yaml` variable to your `inventory/host_vars/matrix.DOMAIN/vars.yml` file.
 
-For example to change mjolnir's `recordIgnoredInvites` option to `true` you would add the following to your `vars.yml` file.
+For example to change Mjolnir's `recordIgnoredInvites` option to `true` you would add the following to your `vars.yml` file.
 
 ```yaml
 matrix_bot_mjolnir_configuration_extension_yaml: |

docs/configuring-playbook-cactus-comments.md

@@ -21,7 +21,7 @@ Add the following block to your `vars.yaml` and make sure to exchange the tokens
 
 ```yaml
 #################
-## Cactus Chat ##
+## Cactus Comments ##
 #################
 
 # This enables the backend (appservice)

docs/configuring-playbook-client-cinny.md

@@ -1,17 +1,17 @@
 # Configuring Cinny (optional)
 
 This playbook can install the [cinny](https://github.com/ajbura/cinny) Matrix web client for you.
-cinny is a web client focusing primarily on simple, elegant and secure interface.
-cinny can be installed alongside or instead of Element.
+Cinny is a web client focusing primarily on simple, elegant and secure interface.
+Cinny can be installed alongside or instead of Element.
 
-If you'd like cinny to be installed, add the following to your configuration file (`inventory/host_vars/matrix.<your-domain>/vars.yml`):
+If you'd like Cinny to be installed, add the following to your configuration file (`inventory/host_vars/matrix.<your-domain>/vars.yml`):
 
 ```yaml
 matrix_client_cinny_enabled: true
 ```
 
-You will also need to add a DNS record so that cinny can be accessed.
-By default cinny will use https://cinny.DOMAIN so you will need to create an CNAME record
+You will also need to add a DNS record so that Cinny can be accessed.
+By default Cinny will use https://cinny.DOMAIN so you will need to create an CNAME record
 for `cinny`. See [Configuring DNS](configuring-dns.md).
 
 If you would like to use a different domain, add the following to your configuration file (changing it to use your preferred domain):

docs/configuring-playbook-conduit.md

@@ -29,11 +29,11 @@ However, since Conduit is difficult (see [famedly/conduit#276](https://gitlab.co
 
 ## Configuring bridges / appservices
 
-Automatic appservice setup is currently unsupported when using conduit. After setting up the service as usual you may notice that it is unable to start.
+Automatic appservice setup is currently unsupported when using Conduit. After setting up the service as usual you may notice that it is unable to start.
 
 You will have to manually register appservices using the the [register-appservice](https://gitlab.com/famedly/conduit/-/blob/next/APPSERVICES.md) command.
 
-Find the `registration.yaml` in the `/matrix` directory, for example `/matrix/mautrix-signal/bridge/registration.yaml`, then pass the content to conduit:
+Find the `registration.yaml` in the `/matrix` directory, for example `/matrix/mautrix-signal/bridge/registration.yaml`, then pass the content to Conduit:
 
 
     @conduit:your.server.name: register-appservice

docs/container-images.md

@@ -19,7 +19,7 @@ These services are enabled and used by default, but you can turn them off, if yo
 
 - [devture/exim-relay](https://hub.docker.com/r/devture/exim-relay/) - the [Exim](https://www.exim.org/) email server (optional)
 
-- [nginx](https://hub.docker.com/_/nginx/) - the [nginx](http://nginx.org/) web server (optional)
+- [Traefik](https://hub.docker.com/_/traefik/) - the [Traefik](https://traefik.io/) web server (optional)
 
 - [certbot/certbot](https://hub.docker.com/r/certbot/certbot/) - the [certbot](https://certbot.eff.org/) tool for obtaining SSL certificates from [Let's Encrypt](https://letsencrypt.org/) (optional)
 
@@ -106,7 +106,7 @@ These services are not part of our default installation, but can be enabled by [
 
 - [matrixdotorg/go-neb](https://hub.docker.com/r/matrixdotorg/go-neb) - the [Go-NEB](https://github.com/matrix-org/go-neb) bot (optional)
 
-- [matrixdotorg/mjolnir](https://hub.docker.com/r/matrixdotorg/mjolnir) - the [mjolnir](https://github.com/matrix-org/mjolnir) moderation bot (optional)
+- [matrixdotorg/mjolnir](https://hub.docker.com/r/matrixdotorg/mjolnir) - the [Mjolnir](https://github.com/matrix-org/mjolnir) moderation bot (optional)
 
 - [gnuxie/draupnir](https://hub.docker.com/r/gnuxie/draupnir) - the [Draupnir](https://github.com/the-draupnir-project/Draupnir/) moderation bot (optional)
 

group_vars/matrix_servers

@@ -228,7 +228,7 @@ matrix_addons_homeserver_container_network: "{{ matrix_playbook_reverse_proxy_co
 matrix_addons_homeserver_client_api_url: "{{ ('http://' + matrix_playbook_reverse_proxy_hostname + ':' + matrix_playbook_internal_matrix_client_api_traefik_entrypoint_port | string) if matrix_playbook_internal_matrix_client_api_traefik_entrypoint_enabled else matrix_homeserver_container_url }}"
 matrix_addons_homeserver_systemd_services_list: "{{ ([traefik_identifier + '.service'] if matrix_playbook_reverse_proxy_type == 'playbook-managed-traefik' else []) if matrix_playbook_internal_matrix_client_api_traefik_entrypoint_enabled else matrix_homeserver_systemd_services_list }}"
 
-# Starting from version `0.6.0` conduit natively supports some sync v3 (sliding-sync) features.
+# Starting from version `0.6.0` Conduit natively supports some sync v3 (sliding-sync) features.
 matrix_homeserver_sliding_sync_url: "{{ matrix_sliding_sync_base_url if matrix_sliding_sync_enabled else (matrix_homeserver_url if matrix_homeserver_implementation in ['conduit'] else '') }}"
 
 ########################################################################

roles/custom/matrix-bridge-mautrix-discord/defaults/main.yml

@@ -153,6 +153,6 @@ matrix_mautrix_discord_bridge_encryption_allow: "{{ matrix_bridges_encryption_en
 matrix_mautrix_discord_bridge_encryption_default: "{{ matrix_bridges_encryption_default }}"
 matrix_mautrix_discord_bridge_encryption_key_sharing_allow: "{{ matrix_mautrix_discord_bridge_encryption_allow }}"
 
-# On conduit versions before 0.5.0 this option prevented users from joining spaces created by the bridge.
+# On Conduit versions before 0.5.0 this option prevented users from joining spaces created by the bridge.
 # Setting this to false fixed the issue.
 matrix_mautrix_discord_bridge_restricted_rooms: true

roles/custom/matrix-client-cinny/defaults/main.yml

@@ -141,7 +141,7 @@ matrix_client_cinny_self_check_validate_certificates: true
 # config.json
 matrix_client_cinny_default_hs_url: ""
 
-# Default cinny configuration template which covers the generic use case.
+# Default Cinny configuration template which covers the generic use case.
 # You can customize it by controlling the various variables inside it.
 #
 # For a more advanced customization, you can extend the default (see `matrix_client_cinny_configuration_extension_json`)
@@ -151,7 +151,7 @@ matrix_client_cinny_default_hs_url: ""
 # This is unlike what it does when looking up YAML template files (no automatic parsing there).
 matrix_client_cinny_configuration_default: "{{ lookup('template', 'templates/config.json.j2') }}"
 
-# Your custom JSON configuration for cinny should go to `matrix_client_cinny_configuration_extension_json`.
+# Your custom JSON configuration for Cinny should go to `matrix_client_cinny_configuration_extension_json`.
 # This configuration extends the default starting configuration (`matrix_client_cinny_configuration_default`).
 #
 # You can override individual variables from the default configuration, or introduce new ones.
@@ -162,6 +162,6 @@ matrix_client_cinny_configuration_extension_json: '{}'
 
 matrix_client_cinny_configuration_extension: "{{ matrix_client_cinny_configuration_extension_json | from_json if matrix_client_cinny_configuration_extension_json | from_json is mapping else {} }}"
 
-# Holds the final cinny configuration (a combination of the default and its extension).
+# Holds the final Cinny configuration (a combination of the default and its extension).
 # You most likely don't need to touch this variable. Instead, see `matrix_client_cinny_configuration_default`.
 matrix_client_cinny_configuration: "{{ matrix_client_cinny_configuration_default | combine(matrix_client_cinny_configuration_extension, recursive=True) }}"