Many people probably didn't even know this - that ansible can be
quite a bit picky about what it will be willing to work with remotely.
Thanks @maxklenk !
`-v` magically creates the source destination as a directory,
if it doesn't exist already. We'd like to avoid this magic
and the potential breakage that it might cause.
We'd rather fail while Docker tries to find things to `--mount`
than have it automatically create directories and fail anyway,
while having contaminated the filesystem.
There's a lot more `-v` instances remaining to be fixed later on.
This is just some start.
Things like `matrix_synapse_container_additional_volumes` and
`matrix_nginx_proxy_container_additional_volumes` were not changed to
use `--mount`, as options for each one are passed differently
(`ro` is `ro`, but `rw` doesn't exist and `slave` is `bind-propagation=slave`).
To avoid breaking people's custom volume mounts, we keep it as it is for now.
A deficiency with `--mount` is that it lacks the `z` option (SELinux
ownership changes), and some of our `-v` instances use that. I'm not
sure how supported SELinux is for us right now, but it might be,
and breaking that would not be a good idea.
Fixes https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/716
This patch makes us use more fully-qualified container image names
(either prefixed with docker.io/ or with localhost/).
The latter happens when self-building is enabled.
We've recently had issues where if an image was removed manually
and the service was restarted (making `docker run` fetch it from Docker Hub, etc.),
we'd end up with a pulled image, even though we're aiming for a self-built one.
Re-running the playbook would then not do a rebuild, because:
- the image with that name already exists (even though it's something
else)
- we sometimes had conditional logic where we'd build only if the git
repo changed
By explicitly changing the name of the images (prefixing with localhost/),
we avoid such confusion and the possibility that we'd automatically pul something
which is not what we expect.
Also, I've removed that condition where building would happen on git
changes only. We now always build (unless an image with that name
already exists). We just force-build when the git repo changes.
also, worker.yaml.j2:
- hone worker_name
- remove worker_pid_file entry (would only be used if worker_daemonize
set to true; also, synapse only knows about the container namespace
and thus can not provide the required host-view PID)
- cherry-pick "Ensure worker config exists in systemd service (#7528)"
from synapse d74cdc1a42e8b487d74c214b1d0ca575429d546a:
"check that the worker config file exists instead of silently failing."
There's no change in the source code. Just a release bump for packaing
reasons. It doesn't matter much for us here, but let's be on the latest
tag anyway.
Depending on the distro, common commands like sleep and chown may either
be located in /bin or /usr/bin.
Systemd added path lookup to ExecStart in v239, allowing only the
command name to be put in unit files and not the full path as
historically required. At least Ubuntu 18.04 LTS is however still on
v237 so we should maintain portability for a while longer.
Well, actually 8cd9cde won't work, unless we put the
`|to_nice_yaml` thing on a new line.
We can, but that takes more lines and makes things look uglier.
Using `|to_json` seems good enough.
The whole file is parsed as YAML later on and merged with the
`_extension` variable before being dumped as YAML again in the end.
This keeps the roles cleaner and more independent of matrix-base,
which may be important for people building their own playbook
out of the individual roles and not using the matrix-base role.
Synapse v1.9.0 changed some things which made the REST Auth Password
Provider break.
The ma1uta/matrix-synapse-rest-password-provider implements some
workarounds for now and will likely deliver a proper fix in the future.
Not much has changed between the 2 projects, so this should be a
painless transition.
Can you double check that the way I have this set only exposes it locally? It is important that the manhole is not available to the outside world since it is quite powerful and the password is hard coded.
Prompted by: https://matrix.org/blog/2019/11/09/avoiding-unwelcome-visitors-on-private-matrix-servers
This is a bit controversial, because.. the Synapse default remains open,
while the general advice (as per the blog post) is to make it more private.
I'm not sure exactly what kind of server people set up and whether they
want to make the room directory public. Our general goal is to favor
privacy and security when running personal (family & friends) and corporate
homeservers, both of which likely benefit from having a more secure default.
Don't mention systemd-journald adjustment anymore, because
we've changed log levels to WARNING and Synapse is not chatty by default
anymore.
The "excessive log messages may get dropped on CentOS" issue no longer
applies to most users and we shouldn't bother them with it.
matrix_synapse_storage_path is already defined in matrix-synapse/defaults/main.yml (with a default of "{{ matrix_synapse_base_path }}/storage"), but was not being used for its presumed purpose in matrix-synapse.service.j2. As a result, if matrix_synapse_storage_path was overridden (in a vars.yml), the synapse service failed to start.
This only gets triggered if:
- the Synapse role is used standalone and the default values are used
- the whole playbook is used, with `matrix_mxisd_enabled: false`
Also discussed previously in #213 (Github Pull Request).
shared-secret-auth and rest-auth logging is still at `INFO`
intentionally, as user login events seem more important to keep.
Those modules typically don't spam as much.
ef5e4ad061 intentionally makes us conform to
the logging format suggested by the official Docker image.
Reverting this part, because it's uglier.
This likely should be fixed upstream as well though.
Somewhat related to #213 (Github Pull Request).
We've been moving in the opposite direction for quite a long time.
All services should just leave logging to systemd's journald.
Fixes a regression introduced during the upgrade to
Synapse v1.1.0 (in 2b3865ceea).
Since Synapse v1.1.0 upgraded to Python 3.7
(https://github.com/matrix-org/synapse/pull/5546),
we need to use a different modules directory when mounting
password provider modules.
Using `|to_json` on a string is expected to correctly wrap it in quotes (e.g. `"4"`).
Wrapping it explicitly in double-quotes results in undesirable double-quoting (`""4""`).
We do use some `:latest` images by default for the following services:
- matrix-dimension
- Goofys (in the matrix-synapse role)
- matrix-bridge-appservice-irc
- matrix-bridge-appservice-discord
- matrix-bridge-mautrix-facebook
- matrix-bridge-mautrix-whatsapp
It's terribly unfortunate that those software projects don't release
anything other than `:latest`, but that's how it is for now.
Updating that software requires that users manually do `docker pull`
on the server. The playbook didn't force-repull images that it already
had.
With this patch, it starts doing so. Any image tagged `:latest` will be
force re-pulled by the playbook every time it's executed.
It should be noted that even though we ask the `docker_image` module to
force-pull, it only reports "changed" when it actually pulls something
new. This is nice, because it lets people know exactly when something
gets updated, as opposed to giving the indication that it's always
updating the images (even though it isn't).
Bridges start matrix-synapse.service as a dependency, but
Synapse is sometimes slow to start, while bridges are quick to
hit it and die (if unavailable).
They'll auto-restart later, but .. this still breaks `--tags=start`,
which doesn't wait long enough for such a restart to happen.
This attempts to slow down bridge startup enough to ensure Synapse
is up and no failures happen at all.
Attempt to fix#192 (Github Issue), potential regression since
70487061f4.
Serializing as JSON/YAML explicitly is much better than relying on
magic (well, Python serialization being valid YAML..).
It seems like Python may prefix strings with `u` sometimes (Python 3?),
which causes Python serialization to not be compatible with YAML.
This doesn't replace all usage of `-v`, but it's a start.
People sometimes troubleshoot by deleting files (especially bridge
config files). Restarting Synapse with a missing registration.yaml file
for a given bridge, causes the `-v
/something/registration.yaml:/something/registration.yaml:ro` option
to force-create `/something/registration.yaml` as a directory.
When a path that's provided to the `-v` option is missing, Docker
auto-creates that path as a directory.
This causes more breakage and confusion later on.
We'd rather fail, instead of magically creating directories.
Using `--mount`, instead of `-v` is the solution to this.
From Docker's documentation:
> When you use --mount with type=bind, the host-path must refer to an existing path on the host.
> The path will not be created for you and the service will fail with an error if the path does not exist.
Reasoning is the same as for matrix-org/synapse#5023.
For us, the journal used to contain `docker` for all services, which
is not very helpful when looking at them all together (`journalctl -f`).
The goal is to move each bridge into its own separate role.
This commit starts off the work on this with 2 bridges:
- mautrix-telegram
- mautrix-whatsapp
Each bridge's role (including these 2) is meant to:
- depend only on the matrix-base role
- integrate nicely with the matrix-synapse role (if available)
- integrate nicely with the matrix-nginx-proxy role (if available and if
required). mautrix-telegram bridge benefits from integrating with
it.
- not break if matrix-synapse or matrix-nginx-proxy are not used at all
This has been provoked by #174 (Github Issue).
The code used to check for a `homeserver.yaml` file and generate
a configuration (+ key) only if such a configuration file didn't exist.
Certain rare cases (setting up with one server name and then
changing to another) lead to `homeserver.yaml` being there,
but a `matrix.DOMAIN.signing.key` file missing (because the domain
changed).
A new signing key file would never get generated, because `homeserver.yaml`'s
existence used to be (incorrectly) satisfactory for us.
From now on, we don't mix things up like that.
We don't care about `homeserver.yaml` anymore, but rather
about the actual signing key.
The rest of the configuration (`homeserver.yaml` and
`matrix.DOMAIN.log.config`) is rebuilt by us in any case, so whether
it exists or not is irrelevant and doesn't need checking.
- matrix_enable_room_list_search - Controls whether searching the public room list is enabled.
- matrix_alias_creation_rules - Controls who's allowed to create aliases on this server.
- matrix_room_list_publication_rules - Controls who can publish and which rooms can be published in the public room list.
`{% matrix_s3_media_store_custom_endpoint_enabled %}` should have
been `{% if matrix_s3_media_store_custom_endpoint_enabled %}` instead.
Related to #132 (Github Pull Request).
In most cases, there's not really a need to touch the system
firewall, as Docker manages iptables by itself
(see https://docs.docker.com/network/iptables/).
All ports exposed by Docker containers are automatically whitelisted
in iptables and wired to the correct container.
This made installing firewalld and whitelisting ports pointless,
as far as this playbook's services are concerned.
People that wish to install firewalld (for other reasons), can do so
manually from now on.
This is inspired by and fixes#97 (Github Issue).
By default, `--tags=self-check` no longer validates certificates
when `matrix_ssl_retrieval_method` is set to `self-signed`.
Besides this default, people can also enable/disable validation using the
individual role variables manually.
Fixes#124 (Github Issue)
This allows overriding the default value for `include_content`. Setting
this to false allows homeserver admins to ensure that message content
isn't sent in the clear through third party servers.
Using `docker_container` with a `cap_drop` argument requires
Ansible >=2.7.
We want to support older versions too (2.4), so we either need to
stop invoking it with `cap_drop` (insecure), or just stop using
the module altogether.
Since it was suffering from other bugs too (not deleting containers
on failure), we've decided to remove `docker_container` usage completely.
`matrix_synapse_no_tls` is now implicit, so we've gotten rid of it.
The `homeserver.yaml.j2` template has been synchronized with the
configuration generated by Synapse v0.99.1 (some new options
are present, etc.)
For consistency with all our other listeners,
we make this one bind on the `::` address too
(both IPv4 and IPv6).
Additional details are in #91 (Github Pull Request).
This reverts commit 0dac5ea508.
Relying on pyOpenSSL is the Ansible way of doing things, but is
impractical and annoying for users.
`openssl` is easily available on most servers, even by default.
We'd better use that.
We run containers as a non-root user (no effective capabilities).
Still, if a setuid binary is available in a container image, it could
potentially be used to give the user the default capabilities that the
container was started with. For Docker, the default set currently is:
- "CAP_CHOWN"
- "CAP_DAC_OVERRIDE"
- "CAP_FSETID"
- "CAP_FOWNER"
- "CAP_MKNOD"
- "CAP_NET_RAW"
- "CAP_SETGID"
- "CAP_SETUID"
- "CAP_SETFCAP"
- "CAP_SETPCAP"
- "CAP_NET_BIND_SERVICE"
- "CAP_SYS_CHROOT"
- "CAP_KILL"
- "CAP_AUDIT_WRITE"
We'd rather prevent such a potential escalation by dropping ALL
capabilities.
The problem is nicely explained here: https://github.com/projectatomic/atomic-site/issues/203
This makes all containers (except mautrix-telegram and
mautrix-whatsapp), start as a non-root user.
We do this, because we don't trust some of the images.
In any case, we'd rather not trust ALL images and avoid giving
`root` access at all. We can't be sure they would drop privileges
or what they might do before they do it.
Because Postfix doesn't support running as non-root,
it had to be replaced by an Exim mail server.
The matrix-nginx-proxy nginx container image is patched up
(by replacing its main configuration) so that it can work as non-root.
It seems like there's no other good image that we can use and that is up-to-date
(https://hub.docker.com/r/nginxinc/nginx-unprivileged is outdated).
Likewise for riot-web (https://hub.docker.com/r/bubuntux/riot-web/),
we patch it up ourselves when starting (replacing the main nginx
configuration).
Ideally, it would be fixed upstream so we can simplify.
We do match the defaults anyway (by default that is),
but people can customize `matrix_user_uid` and `matrix_user_uid`
and it wouldn't be correct then.
In any case, it's better to be explicit about such an important thing.
The matrix-nginx-proxy role can now be used independently.
This makes it consistent with all other roles, with
the `matrix-base` role remaining as their only dependency.
Separating matrix-nginx-proxy was relatively straightforward, with
the exception of the Mautrix Telegram reverse-proxying configuration.
Mautrix Telegram, being an extension/bridge, does not feel important enough
to justify its own special handling in matrix-nginx-proxy.
Thus, we've introduced the concept of "additional configuration blocks"
(`matrix_nginx_proxy_proxy_matrix_additional_server_configuration_blocks`),
where any module can register its own custom nginx server blocks.
For such dynamic registration to work, the order of role execution
becomes important. To make it possible for each module participating
in dynamic registration to verify that the order of execution is
correct, we've also introduced a `matrix_nginx_proxy_role_executed`
variable.
It should be noted that this doesn't make the matrix-synapse role
dependent on matrix-nginx-proxy. It's optional runtime detection
and registration, and it only happens in the matrix-synapse role
when `matrix_mautrix_telegram_enabled: true`.
With this change, the following roles are now only dependent
on the minimal `matrix-base` role:
- `matrix-corporal`
- `matrix-coturn`
- `matrix-mailer`
- `matrix-mxisd`
- `matrix-postgres`
- `matrix-riot-web`
- `matrix-synapse`
The `matrix-nginx-proxy` role still does too much and remains
dependent on the others.
Wiring up the various (now-independent) roles happens
via a glue variables file (`group_vars/matrix-servers`).
It's triggered for all hosts in the `matrix-servers` group.
According to Ansible's rules of priority, we have the following
chain of inclusion/overriding now:
- role defaults (mostly empty or good for independent usage)
- playbook glue variables (`group_vars/matrix-servers`)
- inventory host variables (`inventory/host_vars/matrix.<your-domain>`)
All roles default to enabling their main component
(e.g. `matrix_mxisd_enabled: true`, `matrix_riot_web_enabled: true`).
Reasoning: if a role is included in a playbook (especially separately,
in another playbook), it should "work" by default.
Our playbook disables some of those if they are not generally useful
(e.g. `matrix_corporal_enabled: false`).
We've previously changed a bunch of lists in `homeserver.yaml.j2`
to be serialized using `|to_nice_yaml`, as that generates a more
readable list in YAML.
`matrix_synapse_federation_domain_whitelist`, however, couldn't have
been changed to that, as it can potentially be an empty list.
We may be able to differentiate between empty and non-empty now
and serialize it accordingly (favoring `|to_nice_yaml` if non-empty),
but it's not important enough to be justified. Thus, always
serializing with `|to_json`.
Fixes#78 (Github issue)
As suggested in #63 (Github issue), splitting the
playbook's logic into multiple roles will be beneficial for
maintainability.
This patch realizes this split. Still, some components
affect others, so the roles are not really independent of one
another. For example:
- disabling mxisd (`matrix_mxisd_enabled: false`), causes Synapse
and riot-web to reconfigure themselves with other (public)
Identity servers.
- enabling matrix-corporal (`matrix_corporal_enabled: true`) affects
how reverse-proxying (by `matrix-nginx-proxy`) is done, in order to
put matrix-corporal's gateway server in front of Synapse
We may be able to move away from such dependencies in the future,
at the expense of a more complicated manual configuration, but
it's probably not worth sacrificing the convenience we have now.
As part of this work, the way we do "start components" has been
redone now to use a loop, as suggested in #65 (Github issue).
This should make restarting faster and more reliable.
