Edit installing instructions (#3844)

* Replace "just run-tags install-all/setup-all,start" with "just install-all/setup-all"

Thanks to the tip by Slavi that the overhead of ensure-matrix-users-created is negligible.

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Edit installing instructions

- Move the anchor links to docs/just.md
- Add note about running "ensure-matrix-users-created" tags, if ansible-playbook's tags not "setup-all,ensure-matrix-users-created,start", ie. either "setup-all,start", "setup-email2matrix,start", "setup-aux-files,setup-corporal,start", or "setup-matrix-user-verification-service,start"

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Update descriptions about installation

- Introduce the most conservative and stable raw ansible-playbook command.
- Introduce the just commands on installing.md and maintenance-upgrading-services.md, not on quick-start.md, since it is too early for quick start guide readers who are just starting to climb learning curve to use the shortcuts.

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

* Update docs/configuring-playbook-etherpad.md: remove the note about ensure-matrix-users-created

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

---------

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
Co-authored-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

docs/configuring-playbook-alertmanager-receiver.md

@@ -87,9 +87,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-appservice-double-puppet.md

@@ -27,9 +27,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-appservice-draupnir-for-all.md

@@ -60,9 +60,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-backup-borg.md

@@ -78,9 +78,9 @@ After configuring the playbook, run it with [playbook tags](playbook-tags.md) as
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Manually start a backup
 

docs/configuring-playbook-bot-baibot.md

@@ -387,9 +387,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the bot password (`matrix_bot_baibot_config_user_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_baibot_config_user_password` to let the bot know its new password.
 

docs/configuring-playbook-bot-buscarron.md

@@ -67,9 +67,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the bot password (`matrix_bot_buscarron_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_buscarron_password` to let the bot know its new password.
 

docs/configuring-playbook-bot-chatgpt.md

@@ -67,9 +67,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bot-draupnir.md

@@ -126,9 +126,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the Pantalaimon's password (`matrix_bot_draupnir_pantalaimon_password` in your `vars.yml` file) subsequently, its credentials on the homeserver won't be updated automatically. If you'd like to change the password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_draupnir_pantalaimon_password` to let Pantalaimon know its new password.
 

docs/configuring-playbook-bot-go-neb.md

@@ -230,9 +230,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bot-honoroit.md

@@ -59,9 +59,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the bot password (`matrix_bot_honoroit_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_honoroit_password` to let the bot know its new password.
 

docs/configuring-playbook-bot-matrix-registration-bot.md

@@ -43,9 +43,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the bot password (`matrix_bot_matrix_registration_bot_bot_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_matrix_registration_bot_bot_password` to let the bot know its new password.
 

docs/configuring-playbook-bot-matrix-reminder-bot.md

@@ -38,9 +38,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the bot password (`matrix_bot_matrix_reminder_bot_matrix_user_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_matrix_reminder_bot_matrix_user_password` to let the bot know its new password.
 

docs/configuring-playbook-bot-maubot.md

@@ -60,9 +60,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the bot password (`matrix_bot_maubot_initial_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_maubot_initial_password` to let the bot know its new password.
 

docs/configuring-playbook-bot-mjolnir.md

@@ -128,9 +128,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the Pantalaimon's password (`matrix_bot_mjolnir_pantalaimon_password` in your `vars.yml` file) subsequently, its credentials on the homeserver won't be updated automatically. If you'd like to change the password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_bot_mjolnir_pantalaimon_password` to let Pantalaimon know its new password.
 

docs/configuring-playbook-bridge-appservice-discord.md

@@ -41,9 +41,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Self-Service Bridging (Manual)
 

docs/configuring-playbook-bridge-appservice-irc.md

@@ -73,9 +73,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-appservice-kakaotalk.md

@@ -44,9 +44,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-appservice-slack.md

@@ -76,9 +76,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-appservice-webhooks.md

@@ -37,9 +37,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-beeper-linkedin.md

@@ -46,9 +46,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Set up Double Puppeting by enabling Appservice Double Puppet or Shared Secret Auth
 

docs/configuring-playbook-bridge-go-skype-bridge.md

@@ -25,9 +25,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-heisenbridge.md

@@ -60,9 +60,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-matrix-bridge-sms.md

@@ -44,9 +44,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-discord.md

@@ -53,9 +53,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-facebook.md

@@ -66,9 +66,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-gmessages.md

@@ -31,9 +31,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-googlechat.md

@@ -31,9 +31,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-hangouts.md

@@ -33,9 +33,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-instagram.md

@@ -53,9 +53,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-meta-instagram.md

@@ -79,9 +79,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-meta-messenger.md

@@ -93,9 +93,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-signal.md

@@ -79,9 +79,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-slack.md

@@ -55,9 +55,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-telegram.md

@@ -33,9 +33,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-twitter.md

@@ -33,9 +33,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-whatsapp.md

@@ -47,9 +47,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mautrix-wsproxy.md

@@ -52,9 +52,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-discord.md

@@ -29,9 +29,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-groupme.md

@@ -25,9 +25,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-instagram.md

@@ -25,9 +25,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-slack.md

@@ -34,9 +34,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-steam.md

@@ -25,9 +25,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-mx-puppet-twitter.md

@@ -36,9 +36,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-bridge-postmoogle.md

@@ -60,9 +60,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create a user account of the bridge's bot.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the bridge's bot password (`matrix_postmoogle_password` in your `vars.yml` file) subsequently, the bot user's credentials on the homeserver won't be updated automatically. If you'd like to change the bot user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `matrix_postmoogle_password` to let the bot know its new password.
 

docs/configuring-playbook-bridge-wechat.md

@@ -25,9 +25,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-cactus-comments.md

@@ -74,9 +74,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Usage
 

docs/configuring-playbook-client-cinny.md

@@ -49,6 +49,6 @@ After configuring the playbook and [adjusting your DNS records](#adjusting-dns-r
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-client-element-web.md

@@ -78,6 +78,6 @@ After configuring the playbook and potentially [adjusting your DNS records](#adj
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-client-hydrogen.md

@@ -46,6 +46,6 @@ After configuring the playbook and potentially [adjusting your DNS records](#adj
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-client-schildichat-web.md

@@ -74,6 +74,6 @@ After configuring the playbook and potentially [adjusting your DNS records](#adj
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-dendrite.md

@@ -41,6 +41,6 @@ After configuring the playbook, run it with [playbook tags](playbook-tags.md) as
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-dimension.md

@@ -78,9 +78,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 **Notes**:
 
-- The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 - After Dimension has been installed you may need to log out and log back in for it to pick up the new integration manager. Then you can access integrations in Element Web by opening a room, clicking the Room info button (`i`) button in the top right corner of the screen, and then clicking Add widgets, bridges & bots.
 

docs/configuring-playbook-dynamic-dns.md

@@ -32,9 +32,9 @@ After configuring the playbook, run it with [playbook tags](playbook-tags.md) as
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Additional Reading
 

docs/configuring-playbook-email2matrix.md

@@ -91,8 +91,8 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-email2matrix,start
 
 **Notes**:
 
-- The shortcut commands with `just` program are also available: `just run-tags setup-email2matrix,start` or `just run-tags setup-all,start`
+- The shortcut commands with the [`just` program](just.md) are also available: `just run-tags setup-email2matrix,start` or `just setup-all`
 
-  `just run-tags setup-email2matrix,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just run-tags setup-email2matrix,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note `just setup-all` runs the `ensure-matrix-users-created` tag too.
 
 - After installation, you may wish to send a test email to the email address assigned to `mailbox1` (default: `mailbox1@matrix.example.com`) to make sure that Email2Matrix works as expected.

docs/configuring-playbook-etherpad.md

@@ -55,9 +55,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the Etherpad admin user (`etherpad_admin_username`).
 
-- The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 - If you change the Etherpad admin user's password (`etherpad_admin_password` in your `vars.yml` file) subsequently, the admin user's credentials on the homeserver won't be updated automatically. If you'd like to change the admin user's password, use a tool like [synapse-admin](configuring-playbook-synapse-admin.md) to change it, and then update `etherpad_admin_password` to let the admin user know its new password.
 

docs/configuring-playbook-jitsi.md

@@ -276,9 +276,9 @@ After configuring the playbook and potentially [adjusting your DNS records](#adj
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Usage
 

docs/configuring-playbook-ma1sd.md

@@ -138,9 +138,9 @@ After configuring the playbook, run it with [playbook tags](playbook-tags.md) as
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Troubleshooting
 

docs/configuring-playbook-matrix-authentication-service.md

@@ -297,9 +297,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 **Notes**:
 
-- The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 - If you're in the process of migrating an existing Synapse homeserver to MAS, you should now follow the rest of the steps in the [Migrating an existing Synapse homeserver to Matrix Authentication Service](#migrating-an-existing-synapse-homeserver-to-matrix-authentication-service) guide.
 

docs/configuring-playbook-matrix-corporal.md

@@ -123,9 +123,9 @@ After configuring the playbook, run it with [playbook tags](playbook-tags.md) as
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags setup-aux-files,setup-corporal,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just run-tags setup-aux-files,setup-corporal,start` or `just setup-all`
 
-`just run-tags setup-aux-files,setup-corporal,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just run-tags setup-aux-files,setup-corporal,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note `just setup-all` runs the `ensure-matrix-users-created` tag too.
 
 ## Matrix Corporal files
 

docs/configuring-playbook-matrix-ldap-registration-proxy.md

@@ -41,6 +41,6 @@ After configuring the playbook, run it with [playbook tags](playbook-tags.md) as
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-matrix-registration.md

@@ -59,9 +59,9 @@ After configuring the playbook and potentially [adjusting your DNS records](#adj
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Usage
 

docs/configuring-playbook-mautrix-bridges.md

@@ -104,9 +104,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-use
 
 - The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account.
 
-- The shortcut commands with `just` program are also available: `just install-all` or `just setup-all`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
 
 ## Set up Double Puppeting
 

docs/configuring-playbook-ntfy.md

@@ -57,9 +57,9 @@ After configuring the playbook and potentially [adjusting your DNS records](#adj
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Usage
 

docs/configuring-playbook-pantalaimon.md

@@ -25,6 +25,6 @@ After configuring the playbook, run it with [playbook tags](playbook-tags.md) as
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-postgres-backup.md

@@ -36,6 +36,6 @@ After configuring the playbook, run it with [playbook tags](playbook-tags.md) as
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-prometheus-grafana.md

@@ -62,9 +62,9 @@ After configuring the playbook and potentially [adjusting your DNS records](#adj
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## What does it do?
 

docs/configuring-playbook-prometheus-nginxlog.md

@@ -29,9 +29,9 @@ After configuring the playbook, run it with [playbook tags](playbook-tags.md) as
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Docker Image Compatibility
 

docs/configuring-playbook-prometheus-postgres.md

@@ -19,9 +19,9 @@ After configuring the playbook, run it with [playbook tags](playbook-tags.md) as
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## What does it do?
 

docs/configuring-playbook-rageshake.md

@@ -58,9 +58,9 @@ After configuring the playbook and potentially [adjusting your DNS records](#adj
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Usage
 

docs/configuring-playbook-rest-auth.md

@@ -33,6 +33,6 @@ After configuring the playbook, run it with [playbook tags](playbook-tags.md) as
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-riot-web.md

@@ -37,6 +37,6 @@ After configuring the playbook, run it with [playbook tags](playbook-tags.md) as
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-shared-secret-auth.md

@@ -32,6 +32,6 @@ After configuring the playbook, run it with [playbook tags](playbook-tags.md) as
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-sliding-sync-proxy.md

@@ -46,9 +46,9 @@ After configuring the playbook and potentially [adjusting your DNS records](#adj
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ### External databases
 

docs/configuring-playbook-sygnal.md

@@ -84,9 +84,9 @@ After configuring the playbook and potentially [adjusting your DNS records](#adj
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Usage
 

docs/configuring-playbook-synapse-admin.md

@@ -55,9 +55,9 @@ After configuring the playbook and potentially [adjusting your DNS records](#adj
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Usage
 

docs/configuring-playbook-synapse-auto-compressor.md

@@ -25,9 +25,9 @@ After configuring the playbook, run it with [playbook tags](playbook-tags.md) as
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 ## Usage
 

docs/configuring-playbook-synapse-usage-exporter.md

@@ -57,6 +57,6 @@ After configuring the playbook and potentially [adjusting your DNS records](#adj
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-`just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.

docs/configuring-playbook-user-verification-service.md

@@ -96,9 +96,9 @@ After these variables have been set, run the playbook with [playbook tags](playb
 ansible-playbook -i inventory/hosts setup.yml --tags=setup-matrix-user-verification-service,start
 ```
 
-The shortcut commands with `just` program are also available: `just run-tags setup-matrix-user-verification-service,start` or `just run-tags setup-all,start`
+The shortcut commands with the [`just` program](just.md) are also available: `just run-tags setup-matrix-user-verification-service,start` or `just setup-all`
 
-`just run-tags setup-matrix-user-verification-service,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+`just run-tags setup-matrix-user-verification-service,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note `just setup-all` runs the `ensure-matrix-users-created` tag too.
 
 ## Logging
 

docs/faq.md

@@ -278,9 +278,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 **Notes**:
 
-- The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 - Without setting up [server delegation](howto-server-delegation.md) to `matrix.example.com`, your user identifiers will be like `@user:matrix.example.com`. This is equivalent to having an email address like `bob@mail.company.com`, instead of just `bob@company.com`.
 

docs/installing.md

@@ -142,4 +142,18 @@ Since it is unsafe to keep outdated services running on the server connected to
 
 For more information about upgrading or maintaining services with the playbook, take at look at this page: [Upgrading the Matrix services](maintenance-upgrading-services.md)
 
-Feel free to **re-run the setup command any time** you think something is off with the server configuration. Ansible will take your configuration and update your server to match.
+Feel free to **re-run the setup command any time** you think something is wrong with the server configuration. Ansible will take your configuration and update your server to match.
+
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
+
+**Note**: see [this page on the playbook tags](playbook-tags.md) for more information about those tags.
+
+### Make full use of `just` shortcut commands
+
+After you get familiar with reconfiguring and re-running the playbook to maintain the server, upgrade its services, etc., you probably would like to make use of `just` shortcut commands for faster input.
+
+For example, `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed.
+
+You can learn about the shortcut commands on this page: [Running `just` commands](just.md)

docs/maintenance-upgrading-services.md

@@ -37,11 +37,21 @@ After updating the Ansible roles, then re-run the [playbook setup](installing.md
 ansible-playbook -i inventory/hosts setup.yml --tags=install-all,start
 ```
 
-If you remove components from `vars.yml`, or if we switch some component from being installed by default to not being installed by default anymore, you'd need to run the setup command with `--tags=setup-all` instead of `--tags=install-all`. See [this page on the playbook tags](playbook-tags.md) for more information.
+If you remove components from `vars.yml`, or if we switch some component from being installed by default to not being installed by default anymore, you'd need to run the setup command with the `setup-all` tag as below:
 
-#### Run `just` to execute shortcut command
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
 
-If you want to invoke the `ansible-playbook` command with less typing, you can run `just` to execute the shortcut command: `just install-all` (or `just setup-all`). Note that it restarts all services automatically.
+**Notes**:
+
+- The `ensure-matrix-users-created` playbook tag makes the playbook automatically create the bot's user account, if any.
+
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
+
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
+
+- See [this page on the playbook tags](playbook-tags.md) for more information about those tags.
 
 ## PostgreSQL major version upgrade
 

docs/quick-start.md

@@ -177,7 +177,13 @@ ansible-playbook -i inventory/hosts setup.yml --tags=install-matrix-static-files
 
 After the command finishes, you can also check whether your server federates with the Matrix network by using the [Federation Tester](https://federationtester.matrix.org/) against your base domain (`example.com`), not the `matrix.example.com` subdomain.
 
-If you think something is off with the server configuration, feel free to [re-run the full setup command](#run-the-installation-command) any time.
+### Re-run the full setup command any time
+
+If you think something is wrong with the server configuration, feel free to re-run the setup command any time:
+
+```sh
+ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,ensure-matrix-users-created,start
+```
 
 ## Log in to your user account
 

docs/registering-users.md

@@ -121,9 +121,9 @@ ansible-playbook -i inventory/hosts setup.yml --tags=setup-all,start
 
 **Notes**:
 
-- The shortcut commands with `just` program are also available: `just run-tags install-all,start` or `just run-tags setup-all,start`
+- The shortcut commands with the [`just` program](just.md) are also available: `just install-all` or `just setup-all`
 
-  `just run-tags install-all,start` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just run-tags setup-all,start`, or these components will still remain installed. For more information about `just` shortcuts, take a look at this page: [Running `just` commands](just.md)
+  `just install-all` is useful for maintaining your setup quickly when its components remain unchanged. If you adjust your `vars.yml` to remove other components, you'd need to run `just setup-all`, or these components will still remain installed. Note these shortcuts run the `ensure-matrix-users-created` tag too.
 
 - If you're opening up registrations publicly like this, you might also wish to [configure CAPTCHA protection](configuring-captcha.md).