Use "alice" as placeholder username instead of "john"

"alice" is normally used in combination with "bob", though.

Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>

CHANGELOG.md

@@ -1354,7 +1354,7 @@ Our [justfile](justfile) already defines some additional helpful **shortcut** co
 - `just run-tags install-mautrix-slack,start` - to run specific playbook tags
 - `just start-all` - (re-)starts all services
 - `just stop-group postgres` - to stop only the Postgres service
-- `just register-user john secret-password yes` - registers a `john` user with the `secret-password` password and admin access (admin = `yes`)
+- `just register-user alice secret-password yes` - registers an `alice` user with the `secret-password` password and admin access (admin = `yes`)
 
 Additional helpful commands and shortcuts may be defined in the future.
 

docs/installing.md

@@ -83,13 +83,13 @@ To create your user account (as an administrator of the server) via this Ansible
 
 **Notes**:
 - Make sure to adjust `YOUR_USERNAME_HERE` and `YOUR_PASSWORD_HERE`
-- For `YOUR_USERNAME_HERE`, use a plain username like `john`, not your full identifier (`@user:example.com`)
+- For `YOUR_USERNAME_HERE`, use a plain username like `alice`, not your full identifier (`@alice:example.com`)
 - Use `admin=yes` to make your user account an administrator of the Matrix server
 
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --extra-vars='username=YOUR_USERNAME_HERE password=YOUR_PASSWORD_HERE admin=yes' --tags=register-user
 
-# Example: ansible-playbook -i inventory/hosts setup.yml --extra-vars='username=john password=secret-password admin=yes' --tags=register-user
+# Example: ansible-playbook -i inventory/hosts setup.yml --extra-vars='username=alice password=secret-password admin=yes' --tags=register-user
 ```
 
 Feel free to create as many accounts (for friends, family, etc.) as you want. Still, perhaps you should grant full administrative access to your account only (with `admin=yes`), and others should be created with `admin=no`.

docs/just.md

@@ -11,7 +11,7 @@ For some recipes such as `just update`, our `justfile` recommends installing [`a
 Here are some examples of shortcuts:
 
 | Shortcut                                       | Result                                                                                                         |
-|-----------------------------------------------|----------------------------------------------------------------------------------------------------------------|
+|------------------------------------------------|----------------------------------------------------------------------------------------------------------------|
 | `just roles`                                   | Install the necessary Ansible roles pinned in [`requirements.yml`](../requirements.yml)                        |
 | `just update`                                  | Run `git pull` (to update the playbook) and install the Ansible roles                                          |
 | `just install-all`                             | Run `ansible-playbook -i inventory/hosts setup.yml --tags=install-all,ensure-matrix-users-created,start`       |
@@ -21,7 +21,7 @@ Here are some examples of shortcuts:
 | `just install-service mautrix-slack`           | Run `just run-tags install-mautrix-slack,start` with even less typing                                          |
 | `just start-all`                               | (Re-)starts all services                                                                                       |
 | `just stop-group postgres`                     | Stop only the Postgres service                                                                                 |
-| `just register-user john secret-password yes` | Registers a `john` user with the `secret-password` password and admin access (admin = `yes`)                   |
+| `just register-user alice secret-password yes` | Registers an `alice` user with the `secret-password` password and admin access (admin = `yes`)                 |
 
 While [our documentation on prerequisites](prerequisites.md) lists `just` as one of the requirements for installation, using `just` is optional. If you find it difficult to install it, do not find it useful, or want to prefer raw `ansible-playbook` commands for some reason, feel free to run all commands manually. For example, you can run `ansible-galaxy` directly to install the Ansible roles: `rm -rf roles/galaxy; ansible-galaxy install -r requirements.yml -p roles/galaxy/ --force`.
 

docs/quick-start.md

@@ -136,12 +136,12 @@ To create your user account (as an administrator of the server) via this Ansible
 
 **💡 Notes**:
 - Make sure to adjust `YOUR_USERNAME_HERE` and `YOUR_PASSWORD_HERE`
-- For `YOUR_USERNAME_HERE`, use a plain username like `john`, not your full identifier (`@user:example.com`)
+- For `YOUR_USERNAME_HERE`, use a plain username like `alice`, not your full identifier (`@alice:example.com`)
 
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --extra-vars='username=YOUR_USERNAME_HERE password=YOUR_PASSWORD_HERE admin=yes' --tags=register-user
 
-# Example: ansible-playbook -i inventory/hosts setup.yml --extra-vars='username=john password=secret-password admin=yes' --tags=register-user
+# Example: ansible-playbook -i inventory/hosts setup.yml --extra-vars='username=alice password=secret-password admin=yes' --tags=register-user
 ```
 
 <!--

docs/registering-users.md

@@ -16,7 +16,7 @@ Table of contents:
 
 **Notes**:
 - Make sure to adjust `USERNAME_HERE` and `PASSWORD_HERE`
-- For `USERNAME_HERE`, use a plain username like `john`, not a full identifier (`@user:example.com`)
+- For `USERNAME_HERE`, use a plain username like `alice`, not a full identifier (`@alice:example.com`)
 - Use `admin=yes` or `admin=no` depending on whether you wish to make the user an administrator of the Matrix server
 
 After registering a user (using one of the methods below), **you can log in with that user** via the [Element Web](configuring-playbook-client-element-web.md) service that this playbook has installed for you at a URL like this: `https://element.example.com/`.
@@ -30,7 +30,7 @@ To register a user via this Ansible playbook:
 ```sh
 just register-user USERNAME_HERE PASSWORD_HERE <admin access: yes or no>
 
-# Example: `just register-user john secret-password yes`
+# Example: `just register-user alice secret-password yes`
 ```
 
 **or** by invoking `ansible-playbook` manually:
@@ -38,7 +38,7 @@ just register-user USERNAME_HERE PASSWORD_HERE <admin access: yes or no>
 ```sh
 ansible-playbook -i inventory/hosts setup.yml --extra-vars='username=USERNAME_HERE password=PASSWORD_HERE admin=<yes|no>' --tags=register-user
 
-# Example: ansible-playbook -i inventory/hosts setup.yml --extra-vars='username=john password=secret-password admin=yes' --tags=register-user
+# Example: ansible-playbook -i inventory/hosts setup.yml --extra-vars='username=alice password=secret-password admin=yes' --tags=register-user
 ```
 
 Feel free to register as many users (for friends, family, etc.) as you want. Still, perhaps you should grant full administrative access to your user account only (with `admin=yes`), and others should be created with `admin=no`.
@@ -52,7 +52,7 @@ If you're using the [Synapse](configuring-playbook-synapse.md) homeserver implem
 ```sh
 /matrix/synapse/bin/register-user USERNAME_HERE PASSWORD_HERE <admin access: 0 or 1>
 
-# Example: `/matrix/synapse/bin/register-user john secret-password 1`
+# Example: `/matrix/synapse/bin/register-user alice secret-password 1`
 ```
 
 ### Registering users manually for Dendrite
@@ -62,7 +62,7 @@ If you're using the [Dendrite](./configuring-playbook-dendrite.md) homeserver im
 ```sh
 /matrix/dendrite/bin/create-account USERNAME_HERE PASSWORD_HERE <admin access: 0 or 1>
 
-# Example: `/matrix/dendrite/bin/create-account john secret-password 1`
+# Example: `/matrix/dendrite/bin/create-account alice secret-password 1`
 ```
 
 ### Registering users manually for Matrix Authentication Service
@@ -72,7 +72,7 @@ If you're using the [Matrix Authentication Service](./configuring-playbook-matri
 ```sh
 /matrix/matrix-authentication-service/bin/register-user USERNAME_HERE PASSWORD_HERE <admin access: 0 or 1>
 
-# Example: `/matrix/matrix-authentication-service/bin/register-user john secret-password 1`
+# Example: `/matrix/matrix-authentication-service/bin/register-user alice secret-password 1`
 ```
 
 This `register-user` script actually invokes the `mas-cli manage register-user` command under the hood. If you'd like more control over the registration process, consider invoking the `mas-cli` command directly:

docs/updating-users-passwords.md

@@ -4,7 +4,7 @@
 
 **Notes**:
 - Make sure to adjust `USERNAME_HERE` and `PASSWORD_HERE`
-- For `USERNAME_HERE`, use a plain username like `john`, not a full identifier (`@user:example.com`)
+- For `USERNAME_HERE`, use a plain username like `alice`, not a full identifier (`@alice:example.com`)
 
 You can reset a user's password via the Ansible playbook:
 

roles/custom/matrix-user-creator/vars/main.yml

@@ -18,7 +18,7 @@
 #     initial_password: some-password
 #     initial_type: admin
 #
-#   - username: john
+#   - username: alice
 #     initial_password: some-password
 #     initial_type: user
 #