FFmpeg is a powerful tool for manipulating audiovisual files. Unfortunately, it also has a steep learning curve, especially for users unfamiliar with a command line interface. This app helps users through the command generation process so that more people can reap the benefits of FFmpeg.
Each button displays helpful information about how to perform a wide variety of tasks using FFmpeg. To use this site, click on the task you would like to perform. A new window will open up with a sample command and a description of how that command works. You can copy this command and understand how the command works with a breakdown of each of the flags.
For FFmpeg basics, check out the program’s official website.
For Bash and command line basics, try the Command Line Crash Course.
ffmpeg -i input_file.wav -write_id3v1 1 -id3v2_version 3 -dither_method modified_e_weighted -out_sample_rate 48k -b:a 320k output_file.mp3
This will convert your WAV files to MP3s.
ffmpeg -i input_file -c:v prores -profile:v 1 -vf yadif -c:a pcm_s16le output_file.mov
This command transcodes an input file into a deinterlaced Apple ProRes 422 LT file with 16-bit linear PCM encoded audio. The file is deinterlaced using the yadif filter (Yet Another De-Interlacing Filter).
.mov.ffmpeg -i input_file -c:v libx264 -pix_fmt yuv420p -c:a copy output_file
This command takes an input file and transcodes it to H.264 with an .mp4 wrapper, keeping the audio the same codec as the original. The libx264 codec defaults to a “medium” preset for compression quality and a CRF of 23. CRF stands for constant rate factor and determines the quality and file size of the resulting H.264 video. A low CRF means high quality and large file size; a high CRF means the opposite.
In order to use the same basic command to make a higher quality file, you can add some of these presets:
ffmpeg -i input_file -c:v libx264 -pix_fmt yuv420p -preset veryslow -crf 18 -c:a copy output_file
ffmpeg -i input_video_file.mxf -i input_audio_file.mxf -c:v libx264 -pix_fmt yuv420p -c:a aac output_file.mp4
This will transcode mxf wrapped video and audio files to an H.264 encoded .mp4 file. Please note this only works for unencrypted, single reel DCPs.
Variation: Copy PCM audio streams by using Matroska instead of the MP4 container
ffmpeg -i input_video_file.mxf -i input_audio_file.mxf -c:v libx264 -pix_fmt yuv420p -c:a copy output_file.mkv
ffmpeg -i input_file -c:v libx264 -filter:v "yadif,scale=1440:1080:flags=lanczos,pad=1920:1080:(ow-iw)/2:(oh-ih)/2,format=yuv420p" output_file
Transform a video file with 4:3 aspect ratio into a video file with 16:9 aspect ration by correct pillarboxing.
ffmpeg -i input_file -filter:v "pad=ih*16/9:ih:(ow-iw)/2:(oh-ih)/2" -c:a copy output_file
-c:a copy by -an.Transform a SD video file with 4:3 aspect ratio into an HD video file with 16:9 aspect ratio by correct pillarboxing.
ffmpeg -i input_file -filter:v "colormatrix=bt601:bt709, scale=1440:1080:flags=lanczos, pad=1920:1080:240:0" -c:a copy output_file
scale=1440:1080) works for both upscaling and downscaling. We use the Lanczos scaling algorithm (flags=lanczos), which is slower but gives better results than the default bilinear algorithm.pad=1920:1080:240:0) completes the transformation from SD to HD.-c:a copy with -an.Transform a video file with 16:9 aspect ratio into a video file with 4:3 aspect ration by correct letterboxing.
ffmpeg -i input_file -filter:v "pad=iw:iw*3/4:(ow-iw)/2:(oh-ih)/2" -c:a copy output_file
-c:a copy by -an.ffmpeg -i input_file -map 0 -dn -c:v ffv1 -level 3 -g 1 -slicecrc 1 -slices 16 -c:a copy output_file.mkv -f framemd5 -an md5_output_file
This will losslessly trancode your video with the FFV1 Version 3 codec in a Matroska container. In order to verify losslessness, a framemd5 of the source video is also generated. For more information on FFV1 encoding, try the ffmpeg wiki.
.mkv extension to save your file in a Matroska container. Optionally, choose a different extension if you want a different container, such as .mov or .avi.ffmpeg -i input_file -c:v copy -aspect 4:3 output_file
4:3. Experiment with other aspect ratios such as 16:9. If used together with -c:v copy, it will affect the aspect ratio stored at container level, but not the aspect ratio stored in encoded frames, if it exists.ffmpeg -i input_file.mkv -c:v copy -c:a aac output_file.mp4
This will convert your Matroska (MKV) files to MP4 files.
.mkv.-c:a aac by -an..mp4.ffmpeg -f image2 -framerate 9 -pattern_type glob -i "input_image_*.jpg" -vf scale=250x250 output_file.gif
This will convert a series of image files into a gif.
image2 specifies the image file demuxer. ffmpeg -i concat:input_file1\|input_file2\|input_file3 -c:v libx264 -c:a copy output_file.mp4
This command allows you to create an H.264 file from a DVD source that is not copy-protected.
Before encoding, you’ll need to establish which of the .VOB files on the DVD or .iso contain the content that you wish to encode. Inside the VIDEO_TS directory, you will see a series of files with names like VTS_01_0.VOB, VTS_01_1.VOB, etc. Some of the .VOB files will contain menus, special features, etc, so locate the ones that contain target content by playing them back in VLC.
-i concat:VTS_01_1.VOB\|VTS_01_2.VOB\|VTS_01_3.VOBIt’s also possible to adjust the quality of your output by setting the -crf and -preset values:
ffmpeg -i concat:input_file1\|input_file2\|input_file3 -c:v libx264 -crf 18 -preset veryslow -c:a copy output_file.mp4
Bear in mind that by default, libx264 will only encode a single video stream and a single audio stream, picking the ‘best’ of the options available. To preserve all video and audio streams, add -map parameters:
ffmpeg -i concat:input_file1\|input_file2 -map 0:v -map 0:a -c:v libx264 -c:a copy output_file.mp4
Create high quality GIF
ffmpeg -ss HH:MM:SS -i input_file -filter_complex "fps=10,scale=500:-1:flags=lanczos,palettegen" -t 3 palette.png
ffmpeg -ss HH:MM:SS -i input_file -i palette.png -filter_complex "[0:v]fps=10,scale=500:-1:flags=lanczos[v],[v][1:v]paletteuse" -t 3 -loop 6 output_file
The first command will use the palettegen filter to create a custom palette, then the second command will create the GIF with the paletteuse filter. The result is a high quality GIF.
Simpler GIF creation
ffmpeg -ss HH:MM:SS -i input_file -vf "fps=10,scale=500:-1" -t 3 -loop 6 output_file
This is a quick and easy method. Dithering is more apparent than the above method using the palette* filters, but the file size will be smaller. Perfect for that “legacy” GIF look.
ffmpeg -i input_file -ss 00:00:20 -vframes 1 thumb.png
This command will grab a thumbnail 20 seconds into the video.
ffmpeg -i input_file -vf fps=1/60 out%d.png
This will grab a thumbnail every minute and output sequential png files.
ffmpeg -i input_file -ss 00:12.235 -i "$f" -vframes 1 output_file
Create one thumbnail in JPEG format from a video file at a specific time. In this example: 0hours:0minutes:12sec.235msec
ffmpeg -i input_file -t 5 -c copy output_file
This command captures a certain portion of a video file, starting from the beginning and continuing for the amount of time (in seconds) specified in the script. This can be used to create a preview file, or to remove unwanted content from the end of the file. To be more specific, use timecode, such as 00:00:05.
ffmpeg -i input_file -ss 00:02:00 -to 00:55:00 -c copy output_file
This command allows you to create an excerpt from a video file without re-encoding the image data.
-ss with -c copy if the source is encoded with an interframe codec (e.g., H.264). Since ffmpeg must split on i-frames, it will seek to the nearest i-frame to begin the stream copy.Variation: trim video by setting duration, by using -t instead of -to
ffmpeg -i input_file -ss 00:05:00 -t 10 -c copy output_file
Note: In order to keep the original timestamps, without trying to sanitise them, you may add the -copyts option.
ffmpeg -i input_file -ss 5 -c copy output_file
This command copies a video file starting from a specified time, removing the first few seconds from the output. This can be used to create an excerpt, or remove unwanted content from the beginning of a video file.
ffmpeg -sseof -5 -i input_file -c copy output_file
This command copies a video file starting from a specified time before the end of the file, removing everything before from the output. This can be used to create an excerpt, or extract content from the end of a video file (e.g. for extracting the closing credits).
Create an ISO file that can be used to burn a DVD. Please note, you will have to install dvdauthor. To install dvd author using Homebrew run: brew install dvdauthor
ffmpeg -i input_file -aspect 4:3 -target ntsc-dvd output_file.mpg
This command will take any file and create an MPEG file that dvdauthor can use to create an ISO.
ffmpeg -i input_file -filter:v drawbox=w=iw:h=7:y=ih-h:t=max output_file
This command will draw a black box over a small area of the bottom of the frame, which can be used to cover up head switching noise.
Bash scripts are plain texts files saved with a .sh extension. This entry explains how they work with the example of a bash script named “Rewrap-MXF.sh”, which rewraps .MXF files in a given directory to .MOV files.
“Rewrap-MXF.sh” contains the following text:
for file in *.MXF; do ffmpeg -i "$file" -map 0 -c copy "${file%.MXF}.mov"; done
Note: the shell script (.sh file) and all .MXF files to be processed must be contained within the same directory, and the script must be run from that directory.
Execute the .sh file with the command sh Rewrap-MXF.sh.
Modify the ffmpeg script as needed to perform different transcodes :)
The basic pattern will look similar to this:
for item in *.ext; do ffmpeg -i $item (ffmpeg options here) "${item%.ext}_suffix.ext"
e.g., if an input file is bestmovie002.avi, its output will be bestmovie002_suffix.avi.
ffmpeg -i input_file -f framemd5 -an output_file
This will create an MD5 checksum per video frame.
You may verify an MD5 checksum file created this way by using a Bash script.
ffprobe -i input_file -show_format -show_streams -show_data -print_format xml
This command extracts technical metadata from a video file and displays it in xml.
ffmpeg documentation on ffprobe (full list of flags, commands, www.ffmpeg.org/ffprobe.html)
ffmpeg -report -i input_file -f null -
This decodes your video and displays any crc checksum mismatches. These errors will display in your terminal like this: [ffv1 @ 0x1b04660] CRC mismatch 350FBD8A!at 0.272000 seconds
Frame crcs are enabled by default in FFV1 Version 3.
-loglevel verbose.null muxer. This allows video decoding without creating an output file.- is just a place holder. No file is actually created. ffmpeg -i input file -filter:v idet -f null -
null muxer. This allows video decoding without creating an output file.- is just a place holder. No file is actually created. ffmpeg -f lavfi -i mandelbrot=size=1280x720:rate=25 -c:v libx264 -t 10 output_file
size and rate options allow you to choose a specific frame size and framerate. [more]-pix_fmt to yuv420p for greater H.264 compatibility with media players.ffmpeg -f lavfi -i smptebars=size=720x576:rate=25 -c:v prores -t 10 output_file
size and rate options allow you to choose a specific frame size and framerate. [more]ffmpeg -f lavfi -i testsrc=size=720x576:rate=25 -c:v v210 -t 10 output_file
size and rate options allow you to choose a specific frame size and framerate. [more]Test an HD video projector by playing the SMPTE colour bars pattern.
ffplay -f lavfi -i smptehdbars=size=1920x1080
Test a VGA (SD) video projector by playing the SMPTE colour bars pattern.
ffplay -f lavfi -i smptebars=size=640x480
ffmpeg -f concat -i mylist.txt -c copy output_file
This command takes two or more files of the same file type and joins them together to make a single file. All that the program needs is a text file with a list specifying the files that should be joined. However, it only works properly if the files to be combined have the exact same codec and technical specifications. Be careful, ffmpeg may appear to have successfully joined two video files with different codecs, but may only bring over the audio from the second file or have other weird behaviors. Don’t use this command for joining files with different codecs and technical specs and always preview your resulting video file!
file './first_file.ext' file './second_file.ext' . . . file './last_file.ext'In the above, file is simply the word "file".
-safe 0 before the input file.ffmpeg -f concat -safe 0 -i mylist.txt -c copy output_fileFor more information, see the ffmpeg wiki page on concatenating files.
Play an image sequence directly as moving images, without having to create a video first.
ffplay -framerate 5 input_file_%06d.ext
Notes:
If -framerate is omitted, the playback speed depends on the images’ file sizes and on the computer’s processing power. It may be rather slow for large image files.
You can navigate durationally by clicking within the playback window. Clicking towards the left-hand side of the playback window takes you towards the beginning of the playback sequence; clicking towards the right takes you towards the end of the sequence.
ffmpeg -i input_file -map 0:v video_output_file -map 0:a audio_output_file
This command splits the original input file into a video and audio stream. The -map command identifies which streams are mapped to which file. To ensure that you’re mapping the right streams to the right file, run ffprobe before writing the script to identify which streams are desired.
ffmpeg -i input_file -filter_complex "[0:a:0][0:a:1]amerge[out]" -map 0:v -map "[out]" -c:v copy -shortest output_file
This command combines two audio tracks present in a video file into one stream. It can be useful in situations where a downstream process, like YouTube’s automatic captioning, expect one audio track. To ensure that you’re mapping the right audio tracks run ffprobe before writing the script to identify which tracks are desired. More than two audio streams can be combined by extending the pattern present in the -filter_complex option.
ffmpeg -i input_file -c:a copy -vn output_file
This command extracts the audio stream without loss from an audiovisual file.
ffmpeg -i input_file -filter:v "hflip,vflip" -c:a copy output_file
-c:a copy by -an.E.g. for converting 24fps to 25fps with audio pitch compensation for PAL access copies. (Thanks @kieranjol!)
ffmpeg -i input_file -filter_complex "[0:v]setpts=input_fps/output_fps*PTS[v]; [0:a]atempo=output_fps/input_fps[a]" -map "[v]" -map "[a]" output_file
setpts video filter modifies the PTS (presentation time stamp) of the video stream, and the atempo audio filter modifies the speed of the audio stream while keeping the same sound pitch. Note that the parameter’s order for the image and for the sound are inverted:
setpts the numerator input_fps sets the input speed and the denominator output_fps sets the output speed; both values are given in frames per second.atempo the numerator output_fps sets the output speed and the denominator input_fps sets the input speed; both values are given in frames per second.E.g For creating access copies with your institutions name
ffmpeg -i input_file -vf drawtext="fontfile=font_path:fontsize=font_size:text=watermark_text:fontcolor=font_colour:alpha=0.4:x=(w-text_w)/2:y=(h-text_h)/2" output_file
fontfile=/Library/Fonts/AppleGothic.ttf35 is a good starting point for SD. Ideally this value is proportional to video size, for example use ffprobe to acquire video height and divide by 14.text='FFMPROVISR EXAMPLE TEXT'fontcolor=white or a hexadecimal value such as fontcolor=0xFFFFFF-vf is a shortcut for -filter:v.ffmpeg -i input_video file -i input_image_file -filter_complex overlay=main_w-overlay_w-5:5 output_file
main_w-overlay_w-5:5 uses relative coordinates to place the watermark in the upper right hand corner, based on the width of your input files. Please see the ffmpeg documentation for more examples.ffmpeg -i input_file -vf drawtext="fontfile=font_path:fontsize=font_size:timecode=starting_timecode:fontcolor=font_colour:box=1 :boxcolor=box_colour:rate=timecode_rate:x=(w-text_w)/2:y=h/1.2" output_file
fontfile=/Library/Fonts/AppleGothic.ttf35 is a good starting point for SD. Ideally this value is proportional to video size, for example use ffprobe to acquire video height and divide by 14.hh:mm:ss[:;.]ff. Colon escaping is determined by O.S, for example in Ubuntu timecode='09\\:50\\:01\\:23'. Ideally, this value would be generated from the file itself using ffprobe.fontcolor=white or a hexadecimal value such as fontcolor=0xFFFFFFfontcolor=black or a hexadecimal value such as fontcolor=0x00000025/1-vf is a shortcut for -filter:v.ffmpeg -f image2 -framerate 24 -i input_file_%06d.ext -c:v v210 -an output_file
-start_number 086400 before -i input_file_%06d.ext. The extension for TIFF files is .tif or maybe .tiff; the extension for DPX files is .dpx (or eventually .cin for old files).ffmpeg -r 1 -loop 1 -i image_file -i audio_file -acodec copy -shortest -vf scale=1280:720 output_file
This command will take an image file (e.g. image.jpg) and an audio file (e.g. audio.mp3) and combine them into a video file that contains the audio track with the image used as the video. It can be useful in a situation where you might want to upload an audio file to a platform like YouTube. You may want to adjust the scaling with -vf to suit your needs.
ffmpeg -i input_file -c:v prores -filter:v setfield=tff output_file
setfield=bff for bottom field first. These examples use QuickTime inputs and outputs. The strategy will vary or may not be possible in other file formats. In the case of these examples it is the intention to make a lossless copy while clarifying an unknown characteristic of the stream.
ffprobe input_file -show_streams
Values that are set to 'unknown' and 'undetermined' may be unspecified within the stream. An unknown aspect ratio would be expressed as '0:1'. Streams with many unknown properties may have interoperability issues or not play as intended. In many cases, an unknown or undetermined value may be accurate because the information about the source is unclear, but often the value is intended to be known. In many cases the stream will played with an assumed value if undetermined (for instance a display_aspect_ratio of '0:1' may be played as 'WIDTH:HEIGHT'), but this may or may not be what is intended. Use carefully.
If the display_aspect_ratio is set to '0:1' it may be clarified with the -aspect option and stream copy.
ffmpeg -i input_file -c copy -map 0 -aspect DAR_NUM:DAR_DEN output_file
Other properties may be clarified in a similar way. Replace -aspect and its value with other properties such as shown in the options below. Note that setting color values in QuickTime requires that -movflags write_colr is set.
ffmpeg -h type=name
encoder=libx264decoder=mp3muxer=matroskademuxer=movfilter=cropMade with ♥ at AMIA #AVhack15! Contribute to the project via our GitHub page!