mirror of
https://github.com/rtlsdrblog/rtl-sdr-blog.git
synced 2024-11-10 04:37:37 +01:00
54 lines
2.9 KiB
Plaintext
54 lines
2.9 KiB
Plaintext
rtl-sdr
|
|
turns your Realtek RTL2832 based DVB dongle into a SDR receiver
|
|
======================================================================
|
|
|
|
For more information see:
|
|
https://osmocom.org/projects/rtl-sdr/wiki
|
|
|
|
**********************************************************************
|
|
|
|
*****************************
|
|
Modified RTL-SDR Blog Version
|
|
*****************************
|
|
|
|
1) VCO PLL current fix - Improves stability at frequencies above ~1.5 GHz https://www.rtl-sdr.com/beta-testing-a-modified-rtl-sdr-driver-for-l-band-heat-issues/
|
|
2) RTL_TCP ring buffer enhancement by Stephen Blinick https://www.rtl-sdr.com/significantly-improving-rtl_tcps-performance-with-ring-buffers/
|
|
3) Enabled direct sampling for rtl_tcp
|
|
4) rtl_biast program added, including the ability to turn on/off any GPIO
|
|
5) Hack to force the bias tee to always be on by setting the unused IR endpoint bit to 0 in the EEPROM. Example to force the BT to be always ON "rtl_eeprom -b y", to remove forced BT "rtl_eeprom -b n"
|
|
6) Hack to force direct sampling to be always on by setting the unused remote-enabled bit to 1 in the EEPROM. Example to force direct samping always "rtl_eeprom -q y". To remove forced direct sampling "rtl_eeprom -q n"
|
|
7) Repurposed "offset tuning" to toggle bias tee ON/OFF. We can now use the "offset tuning" button in SDR# and other programs to toggle the bias tee if there is no specific button in the GUI.
|
|
8) Windows released are linked against libusb 1.0.22 which apparently fixes issues for modern Ryzen motherboards.
|
|
|
|
BIAS TEE NOTE: Always take care that you do not enable the bias tee when the device is connected to a short circuited antenna unless there is an inline LNA. However. if you did by accident, don't worry as the circuit is dually protected with a self-resetting thermal fuse and built in protection on the LDO. Just try not to short it out for days at a time, otherwise you could eventually degrade the thermal fuse.
|
|
|
|
********************
|
|
Installation (Linux):
|
|
********************
|
|
|
|
***NOTE***
|
|
If you previously installed librtlsdr-dev via the package manager you should remove this first BEFORE installing these drivers. To completely remove these drivers use the following commands
|
|
|
|
sudo apt purge librtlsdr*
|
|
sudo rm -rvf /usr/lib/librtlsdr* /usr/include/rtl-sdr* /usr/local/lib/librtlsdr* /usr/local/include/rtl-sdr*
|
|
|
|
sudo apt update
|
|
sudo apt install libusb-1.0-0-dev git cmake
|
|
git clone git clone git://github.com/rtlsdrblog/rtl-sdr-blog.git
|
|
cd rtl-sdr/
|
|
mkdir build
|
|
cd build
|
|
cmake ../ -DINSTALL_UDEV_RULES=ON
|
|
make
|
|
sudo make install
|
|
sudo cp ../rtl-sdr.rules /etc/udev/rules.d/
|
|
sudo ldconfig
|
|
|
|
echo 'blacklist dvb_usb_rtl28xxu' | sudo tee --append /etc/modprobe.d/blacklist-dvb_usb_rtl28xxu.conf
|
|
|
|
***********************
|
|
Installation (Windows):
|
|
***********************
|
|
|
|
Download the Release.zip file. Extract the librtlsdr.dll file to the SDR# folder, or whatever software is using it. Rename to rtlsdr.dll if necessary (e.g. SDR# looks for rtlsdr.dll instead of librtlsdr.dll)
|